When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Category: Brakes Price (no $ sign please): $2000 Private or Vendor Listing: Private Listing Part fits (select ONLY those which apply): 997 Location (Region): NorthEast Item Condition: Used
I have a set of PCCB yellow calipers from a 997.1 GT3 they’re in good condition and I think they only have about 8k miles. The pads are Pagid RS14 U2707 shape up front and U8006 in the rear. I believe they were stock pads for PCCB rotos from factory. Please do your own due diligence and confirm these pads will fit your application. I could sell them separately if anyone is interested in one or the other. The calipers will fit other models but pls do your due diligence before buying
I believe they will fit and others have done it. You'll need the OEM bolt spacer (part number 997.351.505.02) that the 997TT uses for PCCBs and a larger brake master cylinder from the 997 GT3 is recommended.See post #6 in the following discussion. I don't have personal experience other than just forum discussions. By the way these are for 380mm front rotors which is a simpler conversion from what i understand. https://rennlist.com/forums/996-turb...l#post10379632
Originally Posted by cy911tt
Do you, or anyone else out there know if these will work on a 04 996tt to upgrade to 350mm rotors? Thanks!
05-07-2018, 11:58 PM
FS: 997 GT3 PCCB Yellow Calipers and Pads
