► Official APEX Wheels Showroom Gallery
#16
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
- Ryan
__________________
APEX Wheels - expert@apexwheels.com
Website - Blog - Instagram - Porsche Fitment Guides
APEX Wheels - expert@apexwheels.com
Website - Blog - Instagram - Porsche Fitment Guides
#18
Rennlist Member
I have to tell you guys, pretty much *every single enthusiast* who sees my Apex wheels loves them and wants info on where to pick up a set... Of course I send them your way!
#19
Rennlist Member
Just a quick smartphone shot...but love the look. My second set is in silver (availability...) and won't look quite as good on my Agate Grey I don't think but will find out this weekend!
#20
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
- Ryan
#22
Rennlist Member
I'll make a build topic one of these days.... 981 GTS PDK and removed most of the interior (fully reversible) and added a bolted FIA cert. roll cage, single racing seat, JRZ RS Pro coilovers, 991S front + 996TT rear calipers with 350mm GiroDiscs all around. Fabspeed catless headers with their Cobb pro tune.
Used the silver set with the wider 9 inch fronts this weekend. Not bad either. Wish I had not gone for the 8.5 in fronts for my darker set.
#23
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Thank you for the mod list. I know other 981 Cayman owners will appreciate the supportive info!
- Ryan
#24
Rennlist Member
I run around -3 front and -2.5 at the back which seems about right to get the Yokohama A005 slicks to work properly. I do still need to upgrade my sway bars as my stock X73 bars don't seem up to it even with pretty stiff racing springs (750/900lb F/R)
#26
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
This has got to be one of the cleanest 996's we've seen, and we are pretty pumped that the owner incorporated our SM-10 wheels into his build.
2002 996 911 Carrera 4
Front:
APEX SM-10 18x8.5" ET42 in Race Silver
225/40-18 Michelin PS2
Rear:
APEXX SM-10 18x11" ET60 in Race Silver
285/30-18 Michelin PS2
Porsche crest center caps
H&R RSS Clubsport coilovers
Adjusted to GT3 street heights and alignment spec (-1º camber front & -1.5º camber rear)
Milltek exhaust
FVD motorsport oil pan
Low temp thermostat
Porsche rollbar
GT3 bucket seats
The owner says, "Works Perfect for me for a combination on street, autocross and track days."
- Ryan
2002 996 911 Carrera 4
Front:
APEX SM-10 18x8.5" ET42 in Race Silver
225/40-18 Michelin PS2
Rear:
APEXX SM-10 18x11" ET60 in Race Silver
285/30-18 Michelin PS2
Porsche crest center caps
H&R RSS Clubsport coilovers
Adjusted to GT3 street heights and alignment spec (-1º camber front & -1.5º camber rear)
Milltek exhaust
FVD motorsport oil pan
Low temp thermostat
Porsche rollbar
GT3 bucket seats
The owner says, "Works Perfect for me for a combination on street, autocross and track days."
- Ryan
The following users liked this post:
cpsneineleven (08-03-2023)
#27
Rennlist Member
It's pretty good! When the tires are fresh I get 1 race out of the slicks and then when we use them again for a practice session a few weeks later things are a little iffy rear grip wise.
Video to illustrate -
Video to illustrate -
The following users liked this post:
cwbrown (04-13-2020)
#30
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
It's pretty good! When the tires are fresh I get 1 race out of the slicks and then when we use them again for a practice session a few weeks later things are a little iffy rear grip wise.
Video to illustrate - https://www.youtube.com/watch?v=Be2zDTxhNbI
Video to illustrate - https://www.youtube.com/watch?v=Be2zDTxhNbI
Front: 18x8.5" ET42 - 245/40-18 Toyo R888R (or 235/40-18)
Rear: 18x11" ET36 - 315/30-18 Toyo R888R
Any suspension modifications?
- Ryan