Anyone need these engine / ignition bits
#1
Burning Brakes
Thread Starter
Anyone need these engine / ignition bits
Green wire, spark plug wires, and fuel injectors were only on the car for about a month, and only run for several minutes, so basically new. One of the vacuum ports on the damper is at an angle, not sure if that is as-designed.
Anyone see anything they need from the engine pictures?
Anyone see anything they need from the engine pictures?
Last edited by Socal_Tom; 11-16-2017 at 11:53 AM.
#3
I may need the distributor for an experiment. Are you selling these? And second on the fpr and dampers.
#7
Burning Brakes
Thread Starter
Trending Topics
#8
Burning Brakes
#9
Chronic Tool Dropper
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Tom --
Post prices for the pieces please, with an OBO option if you want. Accept an offer and it's sold. No auctions here.
Post prices for the pieces please, with an OBO option if you want. Accept an offer and it's sold. No auctions here.
#11
Race Car
Hey Tom are you selling off other bits on your motor? If so I am in need of the overflow valve P/N 928 107 351 00. It is a plastic T fitting that connects to the oil filler breather hose as seen below.
Thanks!
Thanks!
#14
Burning Brakes
Thread Starter
Hi folks - good to see that there are people here this can help.
I did not intend to cause any price issues, wasn't sure if anyone needed anything. I'll make sure to list the prices on anything using a discount from 928Intl as a guideline.
I will PM people who expressed an interest in any of the bits.
Ping me if you see something you need.
I did not intend to cause any price issues, wasn't sure if anyone needed anything. I'll make sure to list the prices on anything using a discount from 928Intl as a guideline.
I will PM people who expressed an interest in any of the bits.
Ping me if you see something you need.
#15
Burning Brakes
Thread Starter
Spark plug wire set - $70 (basically new)
Distributor and new cap - $100 (less 1/2 of common reference point)
S4 damper and regulator are different I believe.
Let me pull and check the Thermo time switch.
Nate - overflow valve P/N 928 107 351 00 is yours.
Distributor and new cap - $100 (less 1/2 of common reference point)
S4 damper and regulator are different I believe.
Let me pull and check the Thermo time switch.
Nate - overflow valve P/N 928 107 351 00 is yours.