When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ok, talking to Getty. Their RSA wing is very similar to the LWT look/setup, all glass no fatty rubber lip.
Want to see if they can/will do a full 1 piece decklid/wing.
Anyway in SoCal looking for a 3.8RS wing, unpainted, from getty, like new, carbon top wing!!!
Ok, talking to Getty. Their RSA wing is very similar to the LWT look/setup, all glass no fatty rubber lip.
Want to see if they can/will do a full 1 piece decklid/wing.
You'll be much better off buying only the wing portion and using your existing decklid or a Porsche decklid. Out of the mold their one-piece wings are not wide enough by 1/2 - 3/4". Which means spending a few hours layering on fiberglass to get the spacing between the body correct.
You'll be much better off buying only the wing portion and using your existing decklid or a Porsche decklid. Out of the mold their one-piece wings are not wide enough by 1/2 - 3/4". Which means spending a few hours layering on fiberglass to get the spacing between the body correct.
i did this. Using existing lid. Stripped down. Getty wing. Fitment is good
with decklid, glass OK, complete decklid/wing ideal... what you got? Red? Awesome!
I'm probably going to unload the unpainted Getty RS 3.8 wing and go to something more super-cup / LWT style instead on my car.
Like this
Hi Spyrex,
lening on that wing too, looking really good and weighting less than 4kg so saving 6.5kg vs the original setup at 10.5kg
agree it would look better if done in one piece, can Getty do so ?
cheers
Konstantin
DP makes top notch bits. Here in the states I know of those who have had issues getting their parts here.
I opted for the Getty tail that fits on the OEM factory decklid. Its being painted now. I would have preferred a 1 piece, but, getting one 'easily' here....