As the title states are all the 996 (.1 and .2) non PSE factory mufflers the same?
Are the brackets and hangers the same as well?

I have an 02 C4S and am looking for a set of mufflers and hangers.

Thanks

 

Go here and you'll see that C4S has a different part number.

http://www.autoatlanta.com/porsche-p...section=202-01

 

Not sure why the different part #. I thought the only difference was the separate, longer, tailpipe on C4S.
Try FD Motorsports. They are known for a very popular modification to stock mufflers.
http://fdmotorsports.net/fister-exhaust-996/

 

you need to see what that option 660 is, I was told by the parts dept all 996 3.6 from 02 to 04 had the same mufflers, just different tailpipes

 

Is that true for GT3 (L&R) 996, (not center tip) same as C2?
They look identical.

 

Yeah they all do look the same. Still doesn't seem like there is a consensus yet.

 

Not sure I'd depend on the forum for a "consensus" - best to check with the parts guys at a dealer.

 

If you find out they are the same, I have a used set of mufflers on stock brackets available from a 2000 C4.

PM me if interested.

 

Yes
I bought a set of lightly used GT3 mufflers, sent them to FD for modification
and was about to to install them on my AE C2

I changed my mind and went aftermarket when a set of Tubi mufflers became
available

The modified GT mufflers (while Fisterized) are now doing duty on clubracer6's
AE car

pre-mod


returned from FD


side by side C2 (AE) OEM's

 

So then they are the same for all 996s?