When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The 996 shift **** is too tall (I already have the 997 sport shift kit from suncoast), it feels like I'm shifting with a cane. What shorter gear shifter options do we have that will work on the oddly shaped shifter stalk (and would come with a boot that will snap into the stock location)?
I'm not sure but this may qualify as a "first world problem." I haven't seen any alternate shift ***** though other than the Rennline silver ball. It doesn't come with a boot though.
I'm not sure but this may qualify as a "first world problem." I haven't seen any alternate shift ***** though other than the Rennline silver ball. It doesn't come with a boot though.
Definitely 1st world problems
I was thinking about trying this one I just wanted to see if we had any other options.
I have one of those and had the local upholstery shop make a very nice leather boot with the old recycled frame. The **** is adjustable to square it all up. Just don't mash yourself in the face pulling the old **** off, no joke.
The function first **** you linked earlier is height-adjustable, and can go shorter than stock. I'm using one in combination with a Redline shift boot and a Ben Nenert short shift kit (B&M clone refitted with full ball bearings). First-world-problem solved
Last edited by boingolover; 08-26-2018 at 09:36 PM.