My 911 build
Apr 4, 2017 | 01:20 PM
Thread Starter
Joined: Apr 2009
Posts: 4,493
Likes: 591
From: Taxronto
Quote:
Originally Posted by
moab
I saw that car in Jason's garage last December. Did you get it from him?
It was parked in his garage but bought from someone else.
Apr 4, 2017 | 01:21 PM
Thread Starter
Joined: Apr 2009
Posts: 4,493
Likes: 591
From: Taxronto
Quote:
Originally Posted by
gsxr_fvr
Cam this is Awsome..I am glad our previous "deal" didn't materialize i guess for both of us.
I also decided to go all out with my 964 Build.
what are your plans for the 964?
Apr 4, 2017 | 03:12 PM
Joined: Mar 2014
Posts: 833
Likes: 19
From: Toronto, Ontario
Something along these lines but with Rotiform Fuch's.
Apr 4, 2017 | 11:38 PM
Joined: Jun 2007
Posts: 26
Likes: 0
Glad to see it is coming together. What are you doing with the suspension. One of the best mods you can do to an SC is get some weight out of it and then some mild suspension tweeks will really help. My car is down to 2387 lbs , I run 225's front and 245's rear on 7's and 8's with Carrera sway bars with 22mm and 26 mm torsion bars: and it is a good set-up for mostly street use
Apr 4, 2017 | 11:51 PM
Joined: Mar 2017
Posts: 18
Likes: 0
Awesome build! I wish I had knowledge and guts to take on a project like this in the future.
Apr 5, 2017 | 10:47 AM
Joined: Nov 2009
Posts: 3,526
Likes: 17
From: Ottawa
Can't wait to see her on the way to Hershey! It better not be faster than mine....
Apr 7, 2017 | 01:22 AM
Thread Starter
Joined: Apr 2009
Posts: 4,493
Likes: 591
From: Taxronto
Jonathon making sure everything's ready for install...
Apr 7, 2017 | 01:23 AM
Thread Starter
Joined: Apr 2009
Posts: 4,493
Likes: 591
From: Taxronto
Almost there...
Apr 7, 2017 | 01:24 AM
Thread Starter
Joined: Apr 2009
Posts: 4,493
Likes: 591
From: Taxronto
She's in!!!
Apr 7, 2017 | 10:29 AM
Joined: Dec 2006
Posts: 3,625
Likes: 322
From: Toronto
Congrats!! You figure out a solution to those severed fuel lines? Hooking it all up on Sat?
Apr 7, 2017 | 11:26 AM
Thread Starter
Joined: Apr 2009
Posts: 4,493
Likes: 591
From: Taxronto
Yup! Jonathans got a good fix and tomorrow will be another big day. I think most of the car will be completed.
Apr 7, 2017 | 12:03 PM
Joined: Nov 2009
Posts: 3,526
Likes: 17
From: Ottawa
Apr 7, 2017 | 12:07 PM
Joined: Mar 2011
Posts: 1,782
Likes: 8
Apr 10, 2017 | 07:30 PM
Thread Starter
Joined: Apr 2009
Posts: 4,493
Likes: 591
From: Taxronto
Shot of the clean interior with the WEVO shifter
Apr 10, 2017 | 07:33 PM
Thread Starter
Joined: Apr 2009
Posts: 4,493
Likes: 591
From: Taxronto
Pulled out the passenger seat to install the new ecu and drill a hole to run the cabling to the rear engine bay...
