What did you buy your 991 today thread
04-04-2017 | 09:01 AM
#1097
Rennlist Member
Joined: Sep 2012
Posts: 995
Likes: 612
From: MD
techart springs
swapped to LED clear corners (much better than the bulb type)
SPASM front lip
been thinking about powder coating these wheels to maybe platinum satin look or maybe even platinum satin but leave outer barrel silver. Just not sure-- afraid agate grey with platinum would be too monotone.
swapped to LED clear corners (much better than the bulb type)
SPASM front lip
been thinking about powder coating these wheels to maybe platinum satin look or maybe even platinum satin but leave outer barrel silver. Just not sure-- afraid agate grey with platinum would be too monotone.
04-04-2017 | 11:47 AM
#1098
Burning Brakes
Joined: Dec 2013
Posts: 899
Likes: 57
From: Chalfont, PA
First Mod received to swap out the center wheel cap.
Ordered:
Extended height Console Lid with Crest
Tire tote bag set
Matte Black "Porsche" rear emblem
Matte Black "911" and "S" rear emblem
Hood Protector
Carbon Fiber Illuminated Door Sills
Lloyd Ultimat and Rear Mats
Premium Indoor Car Cover
Alcantara Sun Visors
Clear Tail lights
With the recommendation of those here I also purchased the:
Ultimate Cup holders
Skene No drill front license plate holder
T-Design iPhone mount
Last purchase, and most excited about, customized hood emblem in black/agate grey/racing yellow.
I was very busy this weekend. Needless to say I'm a bit of an impulsive shopper and I don't need to introduce myself to Ryan at Suncoast.
Question - you have a TT S, with Center Locks right? Curious why you needed to purchase a center cap removal tool as that should be included in the CL removal tools in the frunk. Was that missing?
SHow us some pics of the car!
04-04-2017 | 01:08 PM
#1100
Rennlist Member
Joined: Mar 2017
Posts: 216
Likes: 0
From: NYC
It is I!
I did say I'm a bit of an impulsive buyer. J/k. To be honest, I didn't look. I assumed if I have to pay for a rear wiper as an option on the car, then I will probably lack the tools to do it. Plus it was $11, figured why not.
I'll upload pictures this week hopefully.
I did say I'm a bit of an impulsive buyer. J/k. To be honest, I didn't look. I assumed if I have to pay for a rear wiper as an option on the car, then I will probably lack the tools to do it. Plus it was $11, figured why not.
I'll upload pictures this week hopefully.
Hey, is this the same PashaJ that commented over on my YT channel? If so just want to say HI!
Question - you have a TT S, with Center Locks right? Curious why you needed to purchase a center cap removal tool as that should be included in the CL removal tools in the frunk. Was that missing?
SHow us some pics of the car!
Question - you have a TT S, with Center Locks right? Curious why you needed to purchase a center cap removal tool as that should be included in the CL removal tools in the frunk. Was that missing?
SHow us some pics of the car!
04-04-2017 | 01:35 PM
#1101
Burning Brakes
Joined: Apr 2016
Posts: 797
Likes: 337
To my eye, the ride height is somewhat similar to GT3 ride height. No scraping issues and rides close to stock.
Labor was about 1k including full alignment and my shop kept the car overnight to let it settle before the alignment. From my understanding, the labor was a bit higher due to it being a 4S.
04-04-2017 | 02:04 PM
#1103
Burning Brakes
Joined: Dec 2013
Posts: 899
Likes: 57
From: Chalfont, PA
04-04-2017 | 04:18 PM
#1105
Instructor
Joined: Apr 2016
Posts: 126
Likes: 2
From: Austin, TX
The new 4s is not covered under the road hazard as they are over the allowed amount per tire for coverage. The MPSS were just under the allowed amount so all 4 are covered. Otherwise I would have gone with the 4s
04-04-2017 | 04:20 PM
#1106
Three Wheelin'
Joined: Feb 2013
Posts: 1,406
Likes: 51
From: San Diego
04-04-2017 | 05:43 PM
#1107
Advanced
Joined: Aug 2016
Posts: 76
Likes: 7
From: Orange County, CA
Purchased the Michelin Pilot Sport 4S and went with the 305 on the rear instead of the 295. Still surprised that even the 305 did not fill the wheel well like my OEM P-Zeros, even with the 5mm spacers. So decided to go with the 15mm spacer on the rear and very happy with the results.
04-04-2017 | 11:01 PM
#1110
Rennlist Member
Joined: Aug 2014
Posts: 1,350
Likes: 265
From: Wellington FL
https://www.tirerack.com/images/tires/roadHazard/trhp_24MonthRHP_Cert.pdf