Mark this thread as Unsold
Porsche 997.1 Turbo Front Bumper Assembly with GT3 CUP Tow hook provisions
#1
Rennlist Member
Thread Starter
Porsche 997.1 Turbo Front Bumper Assembly with GT3 CUP Tow hook provisions
Category: Exterior - Body Parts
Price (no $ sign please): $2225
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 997
Location (Region): SoCAl
Item Condition: Used
COMPLETE ASSEMBLY (sans the DRL/Blinkers)
$1360 Bumper Cover
$26 Tow Hook Cap
$230 Left Lower Grill fins
$158 Center Lower Grill fins
$230 Right Lower Grill fins
$260 ZunSport Black Stainless Steel Grill Protection Kit
$465 Complete Headlight Washing system with Atlas Grey Painted Nozzle Heads
$305 Left Fog Light Complete Assembly unit with Upgraded Bright WHITE LED BULBS
$305 Right Fog Light Complete Assembly unit with Upgraded Bright WHITE LED BULBS
$250 Custom Made Carbonfiber leading Edge Fender Extensions
TOTAL: $3,589.00 MSRP
YOUR PRICE: $2,225 PLUS SHIPPING (Bumper is located in Southern California at BBI for pickup as well)
NOTE: WERKS1 Splitter is available as well. It has a straight line crack at the center point, you can see I have put carbon tape over it which does a great job of masking the crack. $775 (These are $2000 NEW!!!!)
#2
Rennlist Member
Thread Starter
$2,500 and I'll throw in the Werks1 Front Splitter. This is a great track day plug and play option, allowing you to keep your DD/CC nose fresh and clean! Also included are the clear side marker lights with matching bright white LED's that match the fog lamp LED's.
#5
Rennlist Member
Thread Starter
$2,500 and I'll throw in the Werks1 Front Splitter. This is a great track day plug and play option, allowing you to keep your DD/CC nose fresh and clean! Also included are the clear side marker lights with matching bright white LED's that match the fog lamp LED's.
Trending Topics
#8
Is this painted black or the black with the specks in it?
Is this just a simple wiring deal to make the lights work with a 997.1S?
Is this just a simple wiring deal to make the lights work with a 997.1S?
#9
Rennlist Member
Thread Starter
Hi,
Its actually Atlas Grey. If you understand simple wiring and electronics, then yes. If not, any Indy shop could handle the project. Not too sure what would be involved in order to get the headlight washers to work if your car didn't come delivered with the washing system though....I would include all the pumps, tubes, motors, tanks, etc...to hook the system up.
Its actually Atlas Grey. If you understand simple wiring and electronics, then yes. If not, any Indy shop could handle the project. Not too sure what would be involved in order to get the headlight washers to work if your car didn't come delivered with the washing system though....I would include all the pumps, tubes, motors, tanks, etc...to hook the system up.