When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You could get leather everything from Porsche - even the *****, stalks, levers, boots, vent slats,... you name it, it could be covered in leather.
However, there were many model years where leather dashes, console and lower door panels were not available in leather in the US. This was because of the hot climate in some States - the heat softened the glue, and allowed the leather to shrink and pull away.
Interior is gorg. As to the rest of it, I'm the contrarian here. Overall, it makes the front end look bulbous. The meeting faces of the lower panel aft of the wheel protrudes. I'm thinking that is a design choice, if you are going to have a line, do something with it. The original form was long curves, no flat areas. This doesn't work. It's damn near impossible to improve on Porsche's design.
Interior is gorg. As to the rest of it, I'm the contrarian here.
I agree with you here. The interior is pretty good, but I don't care for the body work. Removing side moldings and adding GTS mirrors would have done a lot more than adding all these plastic pieces. A good example of "less is more", I would say, but they have to sell their stuff.