Getting my tips ceramic coated black
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Doing it middle of this week and decided to document the steps. Will add to this as I get them back.
They came off easy, took just a few minutes using a 10mm socket.
All cleaned up and going to the coater tomorrw.
Flat black is the plan!
They came off easy, took just a few minutes using a 10mm socket.
All cleaned up and going to the coater tomorrw.
Flat black is the plan!
#2
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Keep us posted spiderv6!
Had mine done a gunmetal ceramic coating. Did powder coat at first and learned my lesson. These tips get way too hot on the 991, and something that withstands higher temps like ceramic is the only way to go. The powder coating failed on my tips. Started cracking and chipping off.
![Name: photo869.jpg
Views: 1955
Size: 1,019.3 KB](https://rennlist.com/forums/attachments/991/1139254d1488149922-getting-my-tips-ceramic-coated-black-photo869.jpg)
![Name: photo449.jpg
Views: 1886
Size: 910.4 KB](https://rennlist.com/forums/attachments/991/1139252d1488149921-getting-my-tips-ceramic-coated-black-photo449.jpg)
![Name: photo385.jpg
Views: 1909
Size: 526.0 KB](https://rennlist.com/forums/attachments/991/1139251d1488149911-getting-my-tips-ceramic-coated-black-photo385.jpg)
Had mine done a gunmetal ceramic coating. Did powder coat at first and learned my lesson. These tips get way too hot on the 991, and something that withstands higher temps like ceramic is the only way to go. The powder coating failed on my tips. Started cracking and chipping off.
![Name: photo869.jpg
Views: 1955
Size: 1,019.3 KB](https://rennlist.com/forums/attachments/991/1139254d1488149922-getting-my-tips-ceramic-coated-black-photo869.jpg)
![Name: photo449.jpg
Views: 1886
Size: 910.4 KB](https://rennlist.com/forums/attachments/991/1139252d1488149921-getting-my-tips-ceramic-coated-black-photo449.jpg)
![Name: photo385.jpg
Views: 1909
Size: 526.0 KB](https://rennlist.com/forums/attachments/991/1139251d1488149911-getting-my-tips-ceramic-coated-black-photo385.jpg)
![Name: photo41.jpg
Views: 1914
Size: 996.5 KB](https://rennlist.com/forums/attachments/991/1139253d1488149921-getting-my-tips-ceramic-coated-black-photo41.jpg)
#3
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
You will love it.
STG, I'm pretty sure the coating failed on your tips because it was undercured. That's the symptoms of that. When powdercoat gets overheated, it gets soft, it doesn't chip.
STG, I'm pretty sure the coating failed on your tips because it was undercured. That's the symptoms of that. When powdercoat gets overheated, it gets soft, it doesn't chip.
#4
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by MJG911
You will love it.
STG, I'm pretty sure the coating failed on your tips because it was undercured. That's the symptoms of that. When powdercoat gets overheated, it gets soft, it doesn't chip.
STG, I'm pretty sure the coating failed on your tips because it was undercured. That's the symptoms of that. When powdercoat gets overheated, it gets soft, it doesn't chip.
#5
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
improper prep or undercure. The tips have an air gap around them. I've got 11 years of professional powdercoating under my belt. But, since I just did my tips today, we will see how they hold up.
#6
Banned
Join Date: Jan 2013
Location: Chicagoland Area
Posts: 26,141
Likes: 0
Received 5,410 Likes
on
2,516 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
MJG911, what constitutes proper curing? Thank you. Assuming proper prep.
#7
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by MJG911
improper prep or undercure. The tips have an air gap around them. I've got 11 years of professional powdercoating under my belt. But, since I just did my tips today, we will see how they hold up.
Rear engine car and close mufflers = hotter than your average car.
Trending Topics
#8
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
not to threadjack, but this is what happens when powdercoat gets too hot. You can see it melted and actually slung some off of the wheel and onto the brake rotor. plus not seen, are other runs in the coating from heat.
![](https://imagizer.imageshack.us/v2/540x720q90/911/leqbSJ.jpg)
#9
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I will be interested in your results. I am in PA, but can see NJ, across the Delaware River, from my house. I may well follow your example if you are satisfied and will share the details of where you had the coating done.
#10
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by MJG911
not to threadjack, but this is what happens when powdercoat gets too hot. You can see it melted and actually slung some off of the wheel and onto the brake rotor. plus not seen, are other runs in the coating from
So what's the maximum temperature threshold for your powder coat?
Isn't powder coat two words??
![Confused](https://rennlist.com/forums/images/smilies/confused.gif)
#11
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I guess it is, I've seen it both ways. about 300 continuous and up to 400 short duration. I think that wheel got to over 600, but that was on my race car and my thermometer was only rated to be accurate to 450.
also, they do make powder good up to 1200
also, they do make powder good up to 1200