When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Happy New Year all!!
I am looking for a great Porsche shop, in Chicago, that would be able to do a thorough PPI on a 2004 GT3. I believe car is in the Downtown/Hancock Center area. thanks, Tom
Thanks guys!! I really appreciate it!
It looks like the car has been to Auto-Boutique Chicago?? Do you know anything about this shop?
I called Chicago Performance and talked with Al. He seems to know the GT3s and it looks like he supports
several Porsche race cars. Will let you know how things go! Thanks again! Tom
Thanks guys!! I really appreciate it!
It looks like the car has been to Auto-Boutique Chicago?? Do you know anything about this shop?
Anytime.
I have not heard of them. You're in good hands with Al, and the added benefit CP&T was not the current shop doing maaintenance. So, they are an unbiased, 3rd party. That's what you want in a PPI.
Thanks! Fischers was a great place as well!! Trying to stay as close to the seller as possible.
Any pearls of wisdom concerning the GT3 would be appreciated. I see the cooling tubes need to be "pinned". That was news to me. What does that run$$$. I heard something about the LSD??
Have been an "air-cooled" guy for 30 years, even had a 1973 Carrera RS touring that I sold way too early!!!
I am sure we all can sing that song! Tom
This is how far you have to take the motor down to weld fittings with heat exchanger fittings.
i don't know pinning but probably much simpler. If nothing else it affords you the opportunity to change out all the rubber hoses and traditional wear items at 1 time.
Check suspension components, I replaced most of mine last year because of age and excess movement in bushings.
Diff will likly need rebuild unless its just been serviced.
Air cooled cars are great but but totally different experience. Mine is my daily in the summer!
Gadsby-Thanks! Are you wrenching that engine?
that looks pretty daunting!!
The GT3 I am looking at has around 36K miles on it.
Seems to be in great condition with 3M clear bra on the entire front section. Seller looking for $72K.
What do you guys think about pricing on the 2004/05 cars?
I need to see what service history there is, i.e...asked and waiting to hear. thanks again, Tom
Yes do all my own work for the most part. It's like my break from work and family obligations.
Shout out to Andy (Audion19's) for advice and suppport when I consider diving in! Andy and Mooty always have great gt3 insight!
Pricing is relative. Sounds about right. Years ago I looked at a friends 13k mile tracked preped gt3 for 60k and passed, built for track but not driven, now that car is worth a ton! Prep was by fall-line, no expense spared. He switched to BMW, has too many cars, race cars too.
When you fix something just like the air cooled cars, fix it once fix it right. Last winter I did the 911sc.
^ what are you kidding? i have no insight.
i am shipping my 996 to you so you can work on it.
very impressive.
all i am good for is wax the car, wax the girls, oil filter on car... i can't find oil filrter on the girls yet.
but my 6 need pin weld for sure.
Had my coolant tubes welded along with other discussed upgrades done in OH last spring. Cost for coolant tube welding was around $2500. Agree wholeheartedly with requesting advice/insight from Andy (Audion19s). Incredible knowledge and capability. Not a bad driver also
My list for while your in there for parts alone was $3500, less the actual welding. Replace all orings and rubber, even injector orings, and scavage pump orings. My own labor of course.