FREE - Printable Relay stickers
#79
Electron Wrangler
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Michael - would you be willing to share the original MS Word or MS Powerpoint source materials for this as a base for others to modify - folk's don't seem to know how to get started - a full set for all years would be really nice to complete (with a little community help)...
Alan
Alan
Last edited by Alan; 01-20-2014 at 02:09 PM.
#82
Addict
Rennlist Member
Rennlist Member
#83
Rennlist Member
Just found this. Thanks to all parties involved in making the various charts!
I have completely stolen this for printing for the Red Witch.
Thanks!
Seth K. Pyle
I have completely stolen this for printing for the Red Witch.
Thanks!
Seth K. Pyle
#87
Electron Wrangler
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Seth - if you have a fuse tester relay it is supposed to be in position 16 and the label is half height so the fuse part is still accessible. Maybe you don't have a fuse tester relay - but the car should have been delivered with one.
The fuse tester relay is functionally the same as any 141 951 253B so could/can be installed in any of those positions as an alternative.
Alan
The fuse tester relay is functionally the same as any 141 951 253B so could/can be installed in any of those positions as an alternative.
Alan
#88
Rennlist Member
Hi Alan!
The Red Witch did have a fuse tester relay in position 16. Believing the relay to be original, I elected to replace it with a new 53B relay.
I keep one of my Fluke 87V's in the Red Witch, so fuse testing is covered.
I am lazy and didn't bother cutting the excess of label 16.
Thanks!
Seth K. Pyle
The Red Witch did have a fuse tester relay in position 16. Believing the relay to be original, I elected to replace it with a new 53B relay.
I keep one of my Fluke 87V's in the Red Witch, so fuse testing is covered.
I am lazy and didn't bother cutting the excess of label 16.
Thanks!
Seth K. Pyle
#90
Rennlist Member
Did this today to 86.5 "Blackie". Printed on laser printer. Font was perfect. Laminated with packing tape, cleaned each relay in place, cut each sticker out, and used glue stick to fasten.
Last edited by buccicone; 12-26-2016 at 03:40 PM. Reason: additional info