Mark this thread as Unsold
964 S-Car-Go Headers / Custom Exhaust / Pipes
#1
964 S-Car-Go Headers / Custom Exhaust / Pipes
Category: Engine - Exhaust
Price (no $ sign please): $2500
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 964
Location (Region): West
Item Condition: Used
$2,500 shipped to the lower 48.
#5
Unfortunately I don't have any video of the sound - but it does sound good and the straight pipes sound really good if you can get it to the track! No modifications to the bumper are required.
I really don't know what the HP gain is but I'm sure you can coax more out of it with a tune/chip. I was running a LWF with SuperCup cams and appreciated the sound/performance.
I really don't know what the HP gain is but I'm sure you can coax more out of it with a tune/chip. I was running a LWF with SuperCup cams and appreciated the sound/performance.
#7
964 S Car Go Exfhaust System
Hello Brad,
interested... can you tell me the id of the primaries in inches or mm,
also the distance center to center of the V clamps on the muffler or
straight pipes, and lastly the distance of end of V clamp on headers
to the end of muffler, size and length of tail pipes. Sorry to be a
pain ... 964/993 engine in a 73 911 body.
Thanks,
Harry
interested... can you tell me the id of the primaries in inches or mm,
also the distance center to center of the V clamps on the muffler or
straight pipes, and lastly the distance of end of V clamp on headers
to the end of muffler, size and length of tail pipes. Sorry to be a
pain ... 964/993 engine in a 73 911 body.
Thanks,
Harry
Trending Topics
#8
Hi Harry,
Id's are 2.5" on the Primaries and Tailpipes. Width is 29.5" and length from vband to back side of muffler (bumper side) is 15". Tail pipes are 7.5" long.
Hope that helps - ping me with addt'l q's
Id's are 2.5" on the Primaries and Tailpipes. Width is 29.5" and length from vband to back side of muffler (bumper side) is 15". Tail pipes are 7.5" long.
Hope that helps - ping me with addt'l q's
#9
964 S Car Go Exfhaust System
Hi Brad,
What is the id and od of the pipes at the head..? Also the
measurement at the widest end of the cats..? Who made
the exhaust and straight pipes..? call me if you have a moment..
Thanks,
Harry
626 379-72 five two
What is the id and od of the pipes at the head..? Also the
measurement at the widest end of the cats..? Who made
the exhaust and straight pipes..? call me if you have a moment..
Thanks,
Harry
626 379-72 five two
#10
ID and OD are the same at 45mm. Pretty cool that the port collar flares out ever so slightly from where it is welded to the header pipe. Width to the outside of the widest part of the cat is approx 35"