Need help identifying parts
#16
Instructor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks, you are probably right, in fact they were in a bucket full of door stuff, butCan you please take a picture of the part you are referring to? I don't seem to find any screws like those in the PET diagrams for the doors or the door locks and I don't have the doors right now in my garage to check it, they are in the body shop.
Many thanks again.
#17
Instructor
Thread Starter
#18
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Not a master here just took my fuel tank out a week or so ago and remembered they were long and had red paint. Will go out to garage and take picture of the part I referred to
#19
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![](https://cimg8.ibsrv.net/gimg/rennlist.com-vbulletin/2000x1504/img_1209_e24e3425e111b6a6bbafe9c46682d099fe4089b1.jpg)
![](https://cimg9.ibsrv.net/gimg/rennlist.com-vbulletin/2000x1504/img_1211_7503458703416ef767ef62ec0905726aa07ed4a4.jpg)
![](https://cimg0.ibsrv.net/gimg/rennlist.com-vbulletin/2000x1504/img_1215_c71307138b7dc955ef0e1f3e6d54be318582ded7.jpg)
![](https://cimg5.ibsrv.net/gimg/rennlist.com-vbulletin/2000x1504/img_1216_4094063deee56521c12f7885a418c6a2ae1859e1.jpg)
top pic is side view in about the position piece is inside door fram 2nd pic same part different view in same realitive position of where it goes inside door 3 pic is screw hole for bottom and last pic is top screw hole in door above the latch
#20
Instructor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
John many thanks again, not too sure about this one, according to the PET diagram, that part is supposed to be mounted using tapping screws 3,5x13 and the screw I have are 6,3x18, I don't think they fit there but I will check. Also I am not too sure why would they take that part out in order to paint the car in a different color, if I understood it correctly that part goes inside the door frame, doesn't it?
#21
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
John many thanks again, not too sure about this one, according to the PET diagram, that part is supposed to be mounted using tapping screws 3,5x13 and the screw I have are 6,3x18, I don't think they fit there but I will check. Also I am not too sure why would they take that part out in order to paint the car in a different color, if I understood it correctly that part goes inside the door frame, doesn't it?
#24
Instructor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
PET 7.3 Update 296/100 Have the rest of the updates, but everytime I start the program it says: "Error in last update, new update impossible! (PO)"
Have tried everything I could think of to fix it but run out of ideas...
What are you using?
Have tried everything I could think of to fix it but run out of ideas...
What are you using?
#25
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
John many thanks again, not too sure about this one, according to the PET diagram, that part is supposed to be mounted using tapping screws 3,5x13 and the screw I have are 6,3x18, I don't think they fit there but I will check. Also I am not too sure why would they take that part out in order to paint the car in a different color, if I understood it correctly that part goes inside the door frame, doesn't it?
#26
Instructor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Ok, now I know why. I am getting the parts for the VIN of my car (1990), yours is more modern, it uses a different newer shape part (same as 993 cars) I just checked it and the newer part appears if you choose 1991> 964 cars
#27
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
my car is MY91I think the door parts are same as 90s I just googled door latch for 964 Porsche and door solenoid 964 Porsche
#28
Instructor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Sorry you are right I was looking at the wrong diagram, but still the PET says that part is held in place by a tapping screw 3,5x13 much smaller of what I have (6,3x18)
#29
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Part 15 in your diagram is door lock could solenoid cover the part I took picture of is the door latch cover both go inside door but I think they use same size mounting screws
#30
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Dude we are both correct 😎👍