944 2.5 8V Race car #55
#93
Rennlist Member
Thread Starter
Cheers Noahs944!
Yes, we will fiddle SC in, cannot wait firsts tests.
Some additional work with brakes aswell as we had to let the brake booster go.
Yes, we will fiddle SC in, cannot wait firsts tests.
Some additional work with brakes aswell as we had to let the brake booster go.
#95
Rennlist Member
Thread Starter
Car is slowly getting ready. Managed to build intake piping & IC setup. Still missing MBLV, fuel rail, fuel piping, brake lines, MAP sensor, fuel pump + wiring... etc.. but not too far anymore..!
new SC setup + piping
Bulkheads for fuel, brakes and clutch
new SC setup + piping
Bulkheads for fuel, brakes and clutch
The following users liked this post:
Noahs944 (01-23-2021)
#98
Rennlist Member
Thread Starter
has anoyne experience running RE85 fuels and aluminum connectors in their fuel line? Read somewhere it wouldn't be a good combination, but then again - some say it's not a problem. go figure...
#99
We use one 100 and on 10 mico filter in Norway, but Race E85 does not have all the addhesive as pump E85, so it`s less sluggish.
#103
Rennlist Member
Noah..that's called a hydroboost system down here in the lower 48. Used on lots of trucks, like Ford F350's (1 ton and larger)..gets rid of the vacuum booster but has a lot more piping involved. .02 cents Thanks.
#105
Rennlist Member
Thread Starter
damn, some issues with belt slipping. need to figure out some tricks as SC kit is made for car with AC. have some ideas what to test next... Seems that it takes longer than planned what is common when doing new stuff..