Hi folks,

I would like to know if someone can help me. I have the smartycam HD and solo DL plugged via OBD2 of my 2016 370z Nismo. Everything is working great RPM, Speed, Map, Lap times, but the only thing that is not working is the brake and throttle. Do you guys know how I can make it work? If you can help me on this I will really appreciate.

Let me know
Best regards,
Francis

 

The Solo DL configuration needs to be specifically for the 370Z, and the Solo DL needs to be told in the SmartyCam settings to pick throttle an brake position out of the measures that are possible.

Here are the detailed directions. It works well, but it requires attention not only to the camera but to the Solo DL.

http://www.aim-sportline.com/downloa...0Z_104_eng.pdf

 

Can you tell me what exact program I need to make it work and a step by step how to activate it. Because the solo DL is set for the Nissan 370Z but I don't see where to click to make the Solo DL to be told in the Smartycam settings to pick throttle and brake position.
Thank you for your time and your help

 

Using Race Studio 2, downloadable from here: http://www.aim-sportline.com/aim-sof...160616_WEB.exe

Follow these steps and make these changes. Make sure to "Transmit" the changes to the Solo DL at the end. Your dealer should be able to be a resource for helping you through this.

 

Wow you are the best Procoach. I really appreciate your help. It is working now

 

Great news! You have some good tools!