FS: Smartycam GP & SoloDL + CANBUS Interface
#1
Rennlist Member
Thread Starter
FS: Smartycam GP & SoloDL + CANBUS Interface
SOLD
Hi, I'm selling my 1 year old AIM setup. It's been permanently mounted in my car, so there is no wear and tear on anything. The GP unit is the one with the larger screen, you can actually use it to aim the camera. It will come with a 16GB micro card, and a couple 4GB cards.
$1200
The benefit of this setup is that you can overlay most ECU channels and lap number, lap time, speed, track position, etc, in real time onto the video - meaning that when you pull the memory card from the recorder, there is no post processing needed to insert all this data. You can start watching your video and data immediately - saves a ton of time. The system turns on automatically and starts recording when you get on the track. There is nothing else in the price range that is as powerful or convenient.
- AIM Solo DL
- AIM CANBUS interface cable
- Windshield Mount for SoloDL
- AIM Smartycam GP
- 16GB Micro Card
- 2x4GB Micro Cards
- Original Boxes and packaging
Hi, I'm selling my 1 year old AIM setup. It's been permanently mounted in my car, so there is no wear and tear on anything. The GP unit is the one with the larger screen, you can actually use it to aim the camera. It will come with a 16GB micro card, and a couple 4GB cards.
$1200
The benefit of this setup is that you can overlay most ECU channels and lap number, lap time, speed, track position, etc, in real time onto the video - meaning that when you pull the memory card from the recorder, there is no post processing needed to insert all this data. You can start watching your video and data immediately - saves a ton of time. The system turns on automatically and starts recording when you get on the track. There is nothing else in the price range that is as powerful or convenient.
- AIM Solo DL
- AIM CANBUS interface cable
- Windshield Mount for SoloDL
- AIM Smartycam GP
- 16GB Micro Card
- 2x4GB Micro Cards
- Original Boxes and packaging
Last edited by ShakeNBake; 11-29-2014 at 01:24 PM.
#2
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,681
Received 2,837 Likes
on
1,671 Posts
This is a great deal! GLWS!
__________________
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
#6
Rennlist Member
May I assume that this talks to Motec ECU's?
Trending Topics
#8
Rennlist Member
Thanks amso3.
Does this record/playback in HD?
Does this record/playback in HD?
#9
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,681
Received 2,837 Likes
on
1,671 Posts
No, SD
DVD-quality SD!
DVD-quality SD!
#11
Rennlist Member
#12
Rennlist Member
Thread Starter
#14
Rennlist Member
Thread Starter
#15
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,681
Received 2,837 Likes
on
1,671 Posts
I've got a loaded C125 in stock that I picked up in Mooresville last week when I was down for dealer training. I am configuring it to send the VCS info over one of the two CAN outputs to control and send basic info to an SC HD through the ECU Bridge, with the goal of being as automated and bulletproof as possible. Ping me.