Roger Caddell, AiM Training Manager, is doing a webinar Thursday night for a number of SM racers, but he said it's ok if we crash the party. The first session he did for them is available on their Vimeo site and is a very good session. Here are the details if you are interested:

Are you ready to dig into your data a little deeper? Learn ways to make your data system even more valuable? Let's get together and take a look at some ways beyond the basics to get more out of your data acquisition system!

We had a very good turnout for our earlier webinar and Jim Drago has asked me to organize another. LearnFast Webinar 2.0 will build upon what we already learned in our prior session so I strongly suggest everybody that may attend 2.0 take a small part of an evening a watch the video of 1.0 linked here: https://vimeo.com/32178690

This LearnFast Webinar 2.0 is titled:

"A Racers Data Acquisition Triangle; Using Data for Driver Performance, Vehicle Performance, and Vehicle Health"

We have scheduled the webinar for Thursday January 23rd, 2014 from 5:30-7:00 Pacific Time. I know that is a little early on the West coast but finishing any later than 10:00pm on the East coast is not great either. So just like tuning your SM, scheduling this webinar is a compromise! :laughing:

There will be a limited number of spaces available so this will be a "first come first served" deal. send me an email at: roger at aimsports dot com and I will put you on the list and reply back so you know. We limited it to 50 last time and we filled the session up in 3 days so i suggest you don't risk it and signup right away!

Just like Webinar 1.0 we will be recording the session and will have it available a few days later.

And finally all of the software and data examples shown will be with the AiM Sports Race Studio 2 software but the knowledge gained can be applied to any data acquisition analysis.

 

Have a link or phone number? Is there a cost?

 

Van, send an e-mail to roger at aimsports dot com and he will reply.

A suggested prerequisite viewing is here: https://vimeo.com/32178690

I look forward to attending and learning more from Roger! He's a great educator.

 

Peter got the email. The session is free!

Peter - your no slouch as an educator yourself! I'm excited for your session tonight.

 

I wish I could have attended that session... Any other one planned during this winter?

Tx

c.

 

Oh, yes...

We HAVE the technology! <grin>

 

ok, i have a couple questions. never done a webinar before. do i need to download anything? it shows a link to fuze? or do i just click on the link roger sent? i am planning on watching on my mac, so i can have my race studio open on my PC. thanks.

 

You'll download the fuze program so you can watch the webinar. You can watch with two computers, but you can do it on the Windows computer and just switch windows or have both open at the same time if you have a large enough monitor.

 

thanks matt. i downloaded fuze meeting and registered. i am assuming tomorrow i will just click the provided link and that will open the fuze meeting app on my mac? or do i need to open fuze and click "join meeting"?

 

I believe you will be able to just click the link and you will get right in. The email said Roger will open the meeting 45 minutes early, so you should have some time to try it to make sure things work.

 

This was a great session. Watch the AiM Vimeo site for the recording. I'm not sure when Roger will have it up, but there are lots of great info in it.

 

Very good presentation! The audio was good, the slides were clear and I learned some cool new driver performance metrics!

 

The recording of the webinar was placed on our AiM Sports Vimeo site last night and is all ready for viewing. It is at:

https://vimeo.com/84929470

Thanks to everybody that attended, it was a great time and I look forward to more in the future!