FS: 944 Drivetrain
03-17-2013, 11:25 PM
#1
Rennlist Member
Thread Starter
FS: 944 Drivetrain
Porsche 944 drivetrain including race built engine, transmission and torque tube.
Engine: 944 long block race engine 2.5L. All work done by professional race shop in N.J. (Bodymotion). One Cup season on complete rebuild with all the best parts followed by a complete $3500 refreshening of engine with zero hours. Built to the limits of the 944 Cup rules and allowed horsepower and torque maximums. Built from the ground up with new factory high compression 10.6:1 euro pistons and turbo rods.The refresh including new rod bearings, new first oversize rings, hone barrels, turbo exhaust and intake gaskets, belts, refresh cylinder head (valve job, replace guides, resurface, and other odds and ends).
Transmission: 944 NA tranny rebuilt with Quaife diff, short fifth and equipped with turbo oil cooler.
Torque Tube: Completely rebuilt 944 torque tube. Completely disassembled, installed new cermaic bearings and add 5th bearing to improve reliability and reduced friction. Less then 2 hours on the unit.
Located in Washington, DC area. Email Dave at cup944@aol.com
Sale price: $5800
Engine: 944 long block race engine 2.5L. All work done by professional race shop in N.J. (Bodymotion). One Cup season on complete rebuild with all the best parts followed by a complete $3500 refreshening of engine with zero hours. Built to the limits of the 944 Cup rules and allowed horsepower and torque maximums. Built from the ground up with new factory high compression 10.6:1 euro pistons and turbo rods.The refresh including new rod bearings, new first oversize rings, hone barrels, turbo exhaust and intake gaskets, belts, refresh cylinder head (valve job, replace guides, resurface, and other odds and ends).
Transmission: 944 NA tranny rebuilt with Quaife diff, short fifth and equipped with turbo oil cooler.
Torque Tube: Completely rebuilt 944 torque tube. Completely disassembled, installed new cermaic bearings and add 5th bearing to improve reliability and reduced friction. Less then 2 hours on the unit.
Located in Washington, DC area. Email Dave at cup944@aol.com
Sale price: $5800
