Cage verification ? PCA gt, NASA gts and tt

Reply Subscribe

Thread Tools

Search this Thread

09-21-2011 | 02:12 PM

#16

flatsics

Rennlist Member

Joined: Jan 2002

Posts: 1,477

Likes: 35

From: springfield, il

Nobody can believe what I paid for the cage when I tell them.
Cage install including steel and paint was under 3K.

Well worth the drive to Akron, OH.

Reply Like

09-21-2011 | 03:03 PM

#17

M758

Race Director

Joined: Aug 2002

Posts: 17,643

Likes: 8

From: Phoenix, Az

Quote:

Originally Posted by JoeMag

3.8 slide valve and you're most likely going to be in GTS5. ...probably look'n at something like 340 to ground, so to be in gts4 (nasa) your end race weight will need to be higher than ~2900lbs (8.5 X 340) or 3,060 for slicks (9 x 340).

Dan -- Nice color!

If you in GTS5 you are probably well beyond TTA anyway. Probably into TTS or TTR where it is pretty much just power/weight.

Reply Like

09-21-2011 | 03:09 PM

#18

KaiB

Thread Starter

Nordschleife Master

Joined: Feb 2011

Posts: 5,297

Likes: 6

From: Deep Downtown Carrier, OK

Quote:

Originally Posted by M758

If you in GTS5 you are probably well beyond TTA anyway. Probably into TTS or TTR where it is pretty much just power/weight.

There's no doubt about that. We're talking two different builds here; the first this winter will leave a GTS3 / TTA car, the next (after the conversion) will leave doors wide open. PCA GT will wait until then.

Reply Like

Reply Subscribe