944 Racing Chassis and or Lindsey Racing Banana Wing
#1
Rennlist Member
Thread Starter
944 Racing Chassis and or Lindsey Racing Banana Wing
I am willing to sell these two separate, or together.
I have a straight and clean race car chassis for sale. It has a stock suspension under it (no rear torsion bar though or sway bars) (944 turbo I believe on the front struts)
The wheels and the doors are not included in this sale. I have some other stock doors if the buyer would like them.
The cage is fantastic looking.
This car had a haltech system, so there is not much of the original wiring left in the car. Also, the car had a fuel cell, so there are a few extra cut outs for that. All which can easily be covered.
Also, I have a nice Lindsey banana wing setup for a 944 race car.
It includes the lexan hatch. Everything is put together very well.
The factory spoiler piece in this setup is fiberglass, not rubber too.
The hatch is held down with pins that extend up through the hatch into the wing. I took a few pictures of it.
Here it is in a project write up.
http://www.lindseyracing.com/project/page14.html
And on a customer car
http://www.lindseyracing.com/LR/Part...TTDENMARK.html
I am looking for $1400 for the car without the lexan hatch and wing. I am looking for $1100 for the hatch and wing setup. I would go for $2300 for the chassis including the hatch and wing.
NEW PRICE. LOOKING FOR $1000 for the car without the hatch and wing. $900 for the hatch and wing. $650 for the wing and fiberglass factory spoiler without the lexan hatch. or $1800 for everything all at once.
This is a great chance to have a roller for the price of the cage that is in it.
If someone already has a lexan hatch, I would be happy to give credit in a swap for this one.
Thanks
Ed
I have a straight and clean race car chassis for sale. It has a stock suspension under it (no rear torsion bar though or sway bars) (944 turbo I believe on the front struts)
The wheels and the doors are not included in this sale. I have some other stock doors if the buyer would like them.
The cage is fantastic looking.
This car had a haltech system, so there is not much of the original wiring left in the car. Also, the car had a fuel cell, so there are a few extra cut outs for that. All which can easily be covered.
Also, I have a nice Lindsey banana wing setup for a 944 race car.
It includes the lexan hatch. Everything is put together very well.
The factory spoiler piece in this setup is fiberglass, not rubber too.
The hatch is held down with pins that extend up through the hatch into the wing. I took a few pictures of it.
Here it is in a project write up.
http://www.lindseyracing.com/project/page14.html
And on a customer car
http://www.lindseyracing.com/LR/Part...TTDENMARK.html
I am looking for $1400 for the car without the lexan hatch and wing. I am looking for $1100 for the hatch and wing setup. I would go for $2300 for the chassis including the hatch and wing.
NEW PRICE. LOOKING FOR $1000 for the car without the hatch and wing. $900 for the hatch and wing. $650 for the wing and fiberglass factory spoiler without the lexan hatch. or $1800 for everything all at once.
This is a great chance to have a roller for the price of the cage that is in it.
If someone already has a lexan hatch, I would be happy to give credit in a swap for this one.
Thanks
Ed
Last edited by 911racer; 12-28-2010 at 12:12 PM.