how to squish a F-1
01-11-2010 | 12:51 PM
#1
Thread Starter
Nordschleife Master
Joined: Jan 2004
Posts: 5,165
Likes: 2
From: SEATTLE
01-11-2010 | 01:21 PM
#3
Rennlist Member
Joined: Aug 2006
Posts: 41,905
Likes: 1,752
From: All Ate Up With Motor
01-11-2010 | 01:37 PM
#5
Drifting
Joined: May 2003
Posts: 2,585
Likes: 0
From: Charlotte, NC
It "performed well" according to an article I read:
http://formula-one.speedtv.com/artic...ly-2010-races/
http://formula-one.speedtv.com/artic...ly-2010-races/
01-11-2010 | 01:55 PM
#7
Rennlist Member
Joined: Aug 2006
Posts: 41,905
Likes: 1,752
From: All Ate Up With Motor
Trending Topics
01-11-2010 | 02:15 PM
#8
Guru
Lifetime Rennlist
Member
Rennlist Small
Business Sponsor
Lifetime Rennlist
Member
Rennlist Small
Business Sponsor
Joined: Aug 2001
Posts: 15,748
Likes: 102
From: yorba linda, ca
it went really far almost bottoming the rig, which results in fines from Cranfield Test Centre(er
).
Not sure if this has passed or not, in fact, doubt it. Its bad to pass on your first attempt since it suggests you've left something on the table so to speak. In other words, you could have used less material read less weight, mfg time and cost.
).Not sure if this has passed or not, in fact, doubt it. Its bad to pass on your first attempt since it suggests you've left something on the table so to speak. In other words, you could have used less material read less weight, mfg time and cost.
