Sports Racer For Sale
10-04-2009, 10:33 PM
#1
Racer
Thread Starter
Join Date: Jan 2006
Location: Columbus, OH
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
Sports Racer For Sale
For anyone interested, I am selling my D Sports Racer. It is a ridiculously quick and well developed car. The last time it was driven (7/09) at Watkins, it set the DSR lap record at 1:49. The engine has one race weekend on it. Everything for $60k. I am selling it due to a medical condition. I can be contacted via email: jasonbarfield(at)hotmail.com
Stohr Sports Racer Model WF1, Chassis No. 018
Manufactured August 2006 by Stohr Cars, Portland, OR
Homologated to compete in SCCA Classes DSR and CSR
- Powered by 2006 Stock Suzuki GSX-R1000 prepared by KWS
- Power Commander ECU, programmable
- Car weight with 200 Lb driver, gear and all fluids: 1,000 Lbs.
- C&M wet sump pan
- Upgraded oil cooler with custom baffles
- Upgraded carbon fiber ram-air box with K&N filter
- Stack GPS Data Logger 16 channels with 270mm Momo steering wheel display
- SPA F1 quick-disconnect for steering wheel
- Hans-Specific Schroth FIA 6-point formula harness
- Modified shoulder belt mounts to accommodate Hans
- Complete carbon fiber body
- Carbon fiber floor, under tray, splitter, diffuser, rear wing and tunnel extractors
- Updated high down-force front diffuser with front and rear strakes, carbon fiber
- Titanium fasteners throughout
- Lightweight Braille battery
- Taylor differential, axles and CVs
- Ceramic bearings on all spindles and rotating parts
- Upgraded fuel pick-up box - down to ¼ gallon before fuel starvation
- 3-way adjustable shocks, custom-valved
- Dual cable paddle-shift with autoblip/flatshift
- Bump-Shift option complete with mounts and brackets
- Modified brake calipers for zero brake-drag
- Wired for radios, IMSA and Motorola jacks, radio button on steering wheel
- Spar-Box modified for quick access to differential
- Steering column modified to accommodate driver >6ft
Spare Parts Inventory
- (2) Sets BBS 3-piece aluminum wheels
- (2) Sets BBS one piece magnesium wheels
- (1) BBS 3-piece wheel seal
- (1) Set Hoosier full rain tires, used once
- (1) Set Hoosier custom grooved intermediate tires, used once
- (1) Complete body E-Glass, painted black
- (1) Radio antenna with connector (mounted on spare body)
- (4) Floor-to-frame support rods (2 front, 2 rear)
- (1) Aluminum radio mount
- (1) Rear body wicker
- (1) Right rear wing end plate
- (1) Left rear wind end plate
- (1) Front diffuser
- (2) Aluminum strakes
- (1) Front control arm, lower-right
- (1) Front control arm, upper
- (4) Spherical bearings for lower control arms
- (1) Rear control arm, lower right
- (1) Rear control arm, upper
- (1) Adjustable push-rod, front
- (2) Long adjustable push-rod, front
- (1) Adjustable push-rod, rear
- (1) set front bell-cranks with bolts
- (1) Tie-rod link
- (6) Camber-shims 0.033"
- (2) Aluminum shear blocks
- (1) Quaife Differential with sprocket mount
- (1) set aluminum Differential mounts with ceramic bearings
- (1) set Quaife axle inner bells (tulips)
- (1) set Taylor lightweight, gun-drilled axles complete with lightweight tripods
- (1) set Taylor axles, standard
- (1) set Taylor CV joints, standard
- (2) Outer axle stubs
- (3) Quaife sprocket-carriers with mounting hardware
- (1) each Sprockets 15t, 16t, 17t, 44t, 45t, 46t
- (2) each sprockets 47t
- (3) Drive chains, cut-to-length with master links
- (1) Drive chain crimping tool
- (2) each Hypercoil springs (Lbs.) 800, 900, 1100, 1300, 1400, 1500
- (4) each Hypercoil springs (Lbs.) 1000, 1200
- (2) Hypercoil swivel mounts with shims
- (4) Red Devil titanium rotors, front
- (4) Red Devil titanium rotors, rear
- (2) Red Devil rear calipers for titanium rotors
- (1) set Red Devil front brake pads for titanium rotors
- (1) set Hawk DTC70 brake pads for titanium rotors
- (2) Wilwood rear rotors
- (4) Wilwood front rotors
- (2) Wilwood front calipers
- (1) set Wilwood front brake pads
- (1) set Wilwood rear brake pads
- (1) ¾" brake master cylinder
- (1) Bazzaz ECU programmable with no-lift-shift and traction control
- (1) set Wiring harnesses for Bazzaz ECU
- (1) C&M wet sump
- (1) Suzuki air box
- (1) complete Exhaust system, straight pipe
- (1) set Shifter cables
- (1) Clutch cable
- (1) Clutch cover side plate (cable type)
- (1) Alternator with cover
- (1) 3-way toggle switch for ignition
- (2) Wheel bearings, standard front
- (1) Momo 250mm steering wheel, drilled for SPA disconnect, Stack display-ready
- (1) Wing cover
- (1) Car cover
- (1) Front quick-Jack and stand
- (1) Rear quick jack and stand
- (1) Odyssey PC-680 battery
- (1) Braille battery charger
- (3) 3" ID X 4 Ft. orange duct hose
- (1) 1-1/2" ID X 4 Ft. orange duct hose
Stohr Sports Racer Model WF1, Chassis No. 018
Manufactured August 2006 by Stohr Cars, Portland, OR
Homologated to compete in SCCA Classes DSR and CSR
- Powered by 2006 Stock Suzuki GSX-R1000 prepared by KWS
- Power Commander ECU, programmable
- Car weight with 200 Lb driver, gear and all fluids: 1,000 Lbs.
- C&M wet sump pan
- Upgraded oil cooler with custom baffles
- Upgraded carbon fiber ram-air box with K&N filter
- Stack GPS Data Logger 16 channels with 270mm Momo steering wheel display
- SPA F1 quick-disconnect for steering wheel
- Hans-Specific Schroth FIA 6-point formula harness
- Modified shoulder belt mounts to accommodate Hans
- Complete carbon fiber body
- Carbon fiber floor, under tray, splitter, diffuser, rear wing and tunnel extractors
- Updated high down-force front diffuser with front and rear strakes, carbon fiber
- Titanium fasteners throughout
- Lightweight Braille battery
- Taylor differential, axles and CVs
- Ceramic bearings on all spindles and rotating parts
- Upgraded fuel pick-up box - down to ¼ gallon before fuel starvation
- 3-way adjustable shocks, custom-valved
- Dual cable paddle-shift with autoblip/flatshift
- Bump-Shift option complete with mounts and brackets
- Modified brake calipers for zero brake-drag
- Wired for radios, IMSA and Motorola jacks, radio button on steering wheel
- Spar-Box modified for quick access to differential
- Steering column modified to accommodate driver >6ft
Spare Parts Inventory
- (2) Sets BBS 3-piece aluminum wheels
- (2) Sets BBS one piece magnesium wheels
- (1) BBS 3-piece wheel seal
- (1) Set Hoosier full rain tires, used once
- (1) Set Hoosier custom grooved intermediate tires, used once
- (1) Complete body E-Glass, painted black
- (1) Radio antenna with connector (mounted on spare body)
- (4) Floor-to-frame support rods (2 front, 2 rear)
- (1) Aluminum radio mount
- (1) Rear body wicker
- (1) Right rear wing end plate
- (1) Left rear wind end plate
- (1) Front diffuser
- (2) Aluminum strakes
- (1) Front control arm, lower-right
- (1) Front control arm, upper
- (4) Spherical bearings for lower control arms
- (1) Rear control arm, lower right
- (1) Rear control arm, upper
- (1) Adjustable push-rod, front
- (2) Long adjustable push-rod, front
- (1) Adjustable push-rod, rear
- (1) set front bell-cranks with bolts
- (1) Tie-rod link
- (6) Camber-shims 0.033"
- (2) Aluminum shear blocks
- (1) Quaife Differential with sprocket mount
- (1) set aluminum Differential mounts with ceramic bearings
- (1) set Quaife axle inner bells (tulips)
- (1) set Taylor lightweight, gun-drilled axles complete with lightweight tripods
- (1) set Taylor axles, standard
- (1) set Taylor CV joints, standard
- (2) Outer axle stubs
- (3) Quaife sprocket-carriers with mounting hardware
- (1) each Sprockets 15t, 16t, 17t, 44t, 45t, 46t
- (2) each sprockets 47t
- (3) Drive chains, cut-to-length with master links
- (1) Drive chain crimping tool
- (2) each Hypercoil springs (Lbs.) 800, 900, 1100, 1300, 1400, 1500
- (4) each Hypercoil springs (Lbs.) 1000, 1200
- (2) Hypercoil swivel mounts with shims
- (4) Red Devil titanium rotors, front
- (4) Red Devil titanium rotors, rear
- (2) Red Devil rear calipers for titanium rotors
- (1) set Red Devil front brake pads for titanium rotors
- (1) set Hawk DTC70 brake pads for titanium rotors
- (2) Wilwood rear rotors
- (4) Wilwood front rotors
- (2) Wilwood front calipers
- (1) set Wilwood front brake pads
- (1) set Wilwood rear brake pads
- (1) ¾" brake master cylinder
- (1) Bazzaz ECU programmable with no-lift-shift and traction control
- (1) set Wiring harnesses for Bazzaz ECU
- (1) C&M wet sump
- (1) Suzuki air box
- (1) complete Exhaust system, straight pipe
- (1) set Shifter cables
- (1) Clutch cable
- (1) Clutch cover side plate (cable type)
- (1) Alternator with cover
- (1) 3-way toggle switch for ignition
- (2) Wheel bearings, standard front
- (1) Momo 250mm steering wheel, drilled for SPA disconnect, Stack display-ready
- (1) Wing cover
- (1) Car cover
- (1) Front quick-Jack and stand
- (1) Rear quick jack and stand
- (1) Odyssey PC-680 battery
- (1) Braille battery charger
- (3) 3" ID X 4 Ft. orange duct hose
- (1) 1-1/2" ID X 4 Ft. orange duct hose
10-05-2009, 09:44 AM
#3
Lifetime Rennlist Member
Good luck on the sale.
For anyone interested, I know the history of this car - it is one of top (if not the very top) DSRs in the country. The car has been insanely well developed, well maintained and is incredibly fast.
For anyone interested, I know the history of this car - it is one of top (if not the very top) DSRs in the country. The car has been insanely well developed, well maintained and is incredibly fast.
Sucks being poor.
