944S2 PCA Class F For Sale
#1
Rennlist Member
Thread Starter
Join Date: Mar 2002
Location: Mass
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Posting for a friend. This is a fast well sorted S2.
![](https://rennlist.com/forums/members/n_halbert-albums-steve-s-944s2-picture916-steves-944s2.jpg)
Email: steve@gravity
944S2 Class F Racer
SOLD!
SOLD!
![](https://rennlist.com/forums/members/n_halbert-albums-steve-s-944s2-picture916-steves-944s2.jpg)
- Stock engine.The leakdown numbers are nearly perfect and I've had no trouble at all with it.
- Racing suspension.
- Rear 30mm torsion bars,
- front M030 Sway bars (triangulated brackets),
- 600 lbs/inch springs,
- M030 brakes,
- billet aluminum control arms (charlie arms),
- koni adjustable struts (top adjust),
- camber plates,
- Racer's edge spherical bearings at ALL suspension mounting points.
- Ride height was lowered, the car corner balanced and the front camber set to -3 degrees camber, rear to -1 degrees.
- Steering wheel. Momo with Quick release.
- LSD transaxle
- Recaro racing seats. One RPG and one SPG. The RPG is a single piece racing bucket - one of the nicest seats available on the market. The seat was installed on a custom set of seat rails for adjustablity. The passenger seat is a more forgiving Recaro in that it is not a single piece, it reclines and accommodates larger body frames.
- Two sets of 17 inch rims. One set are Fikse FM5's, The other set is my "racing" wheels which look more like FM10's. Both sets of wheels allow the maximum amount of rubber front and rear and are proven "no rub" through my own testing.
- PCA/SCCA OGRacing roll cage. This cage meets all PCA and SCCA racing requirements and is a FULL cage! Nut plates were welded in the frame and the cage bolted to the plates.
- Window net - removable net with weld points in the door frame.
- Two sets of exhaust systems - I've kept the stock muffler and pipes for tracks and other venues that require low noise. I also have a custom straight pipe (with a small bullet muffler) for those times when you can run a track without regard to noise. I love the way the car sounds with this muffler!
- Body art The design you see on the picture is a custom vinyl application that a fellow racer designed and cut for the car. It is essentially a set of very large stickers - NOT PAINT - and can be removed if desired.
Email: steve@gravity
Last edited by N_Halbert; 05-26-2009 at 05:59 PM. Reason: Forgot Price.
#2
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Worth alot more.
#5
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So buy it.
#7
Rennlist Member
Thread Starter
Join Date: Mar 2002
Location: Mass
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The car was originally built for PCA Club racing. NASA has not had much if any presents in the North East until recently. The caged is bolt in but can be removed for modification.