968 brake questions
01-06-2009, 10:43 AM
#17
Rennlist Member
Pretty sure all 924S/944/968 MC's have the same piston size. Also pretty sure that 924S and 944 N/A's do not have a prop/bias valve - they run straight pressure to the rear brakes. But when upgrading calipers you may find the car will be prone to rear lockup, and require some reduction on the rear system.
The turbo/S2/968 (std and M030) use an 18 bar valve. The 944S used the 33 bar valve. Common upgrade to replace the 18 bar valves with the 33 bar valve. The 33 bar valve is a 928 part #.
The turbo/S2/968 (std and M030) use an 18 bar valve. The 944S used the 33 bar valve. Common upgrade to replace the 18 bar valves with the 33 bar valve. The 33 bar valve is a 928 part #.
01-06-2009, 11:34 AM
#19
Nordschleife Master
Thread Starter
