Notices
Racing & Drivers Education Forum
Sponsored by:
Sponsored by:

r8 0, vir 1

Thread Tools
 
Search this Thread
 
Old 06-04-2008 | 03:37 PM
  #1  
997gt3north's Avatar
997gt3north
Thread Starter
Drifting
 
Joined: Nov 2006
Posts: 2,188
Likes: 5
From: Toronto
Default r8 0, vir 1

- this part of VIR never worried me before

- guy leaves lots of room going into the uphill and then decides to catch the car infront of him and then lift (i can only assume)

- i never even knew there was a tire wall there

http://youtube.com/watch?v=gQLM-K9TwWM
Old 06-04-2008 | 03:42 PM
  #2  
Bryan Watts's Avatar
Bryan Watts
Drifting
 
Joined: May 2003
Posts: 2,585
Likes: 0
From: Charlotte, NC
Default

I lift through there all the time to avoid running into traffic (I regularly race with cars that are 25-30 seconds a lap slower)...the key is to be prepared for it rather than to react badly as this guy did. His problem wasn't just caused by a lift but by also being off-line for the right-hander.
Old 06-04-2008 | 03:50 PM
  #3  
DogInBlack's Avatar
DogInBlack
Rennlist Member
 
Joined: Nov 2007
Posts: 791
Likes: 8
From: Gulf Coast, Alabama
Default

There is an entire thread on this called 'Where did this guy fail'
Old 06-04-2008 | 03:51 PM
  #4  
Bryan Watts's Avatar
Bryan Watts
Drifting
 
Joined: May 2003
Posts: 2,585
Likes: 0
From: Charlotte, NC
Default

Already being discussed here:

https://rennlist.com/forums/racing-and-drivers-education-forum/433826-where-did-this-guy-fail.html
Old 06-04-2008 | 04:23 PM
  #5  
ltc's Avatar
ltc
Super Moderator
Needs More Cowbell

Lifetime Rennlist
Member
 
Joined: Mar 2002
Posts: 29,323
Likes: 11
Default

Would this be considered an Enzo or a Favre?
Old 06-04-2008 | 04:45 PM
  #6  
DaveM993's Avatar
DaveM993
Drifting
 
Joined: Jul 2006
Posts: 3,496
Likes: 0
From: ..."RECALCULATING"
Default

Clear ENZO
Old 06-04-2008 | 04:46 PM
  #7  
DrJupeman's Avatar
DrJupeman
Rennlist Member
 
Joined: Sep 2003
Posts: 9,170
Likes: 10
From: New Jersey
Default

Not to mention the discussion in Off Topic, a double-enzo!



Quick Reply: r8 0, vir 1



All times are GMT -3. The time now is 04:01 AM.