Anyone have a source for 3/4" drive 32MM impact socket?
07-03-2002 | 06:04 PM
#1
Thread Starter
Instructor
Joined: May 2001
Posts: 240
Likes: 0
From: Western NYS
Anyone have a source for 3/4" drive 32MM impact socket?
I've been to all of the usual sites and a couple auto parts places trying to find a 3/4" drive 32mm socket for my torque wrench. Anyone know a source for this? Thanks much.
07-05-2002 | 01:54 PM
#4
Advanced
Joined: Jun 2001
Posts: 75
Likes: 0
From: TX
Hey Jim -
Juian is right...the Snap-On sockets are the ones to get, particularly if you're going to use an impact wrench...they're pricey (~$50 each, if I recall), but they sure are nice. Did you find an inexpensive monster torque wrench? Sorry to have dropped the ball on that one....
- Nick
P.S. I haven't forgotten about the video footage...I'm working on it....
Juian is right...the Snap-On sockets are the ones to get, particularly if you're going to use an impact wrench...they're pricey (~$50 each, if I recall), but they sure are nice. Did you find an inexpensive monster torque wrench? Sorry to have dropped the ball on that one....
- Nick
P.S. I haven't forgotten about the video footage...I'm working on it....
07-08-2002 | 02:45 PM
#6
Thread Starter
Instructor
Joined: May 2001
Posts: 240
Likes: 0
From: Western NYS
Thanks everybody.. yes, I bought a cheap clicker from Harbor Freight, Nick... and ended up spending $50 for the socket with Snap-On. Hey, now I don't have to borrow yours anymore at the track! 
