951 Roll Bar/Cage builder in Asheboro, NC?
#4
Is southeast Charlotte too far? Here's a link of work done by Keith (not me) at Eurowerks.
http://gallery.rennlist.com/gallery/CAGEWERK
Keith
http://gallery.rennlist.com/gallery/CAGEWERK
Keith
#6
Race Director
Originally Posted by Keith E.
Is southeast Charlotte too far? Here's a link of work done by Keith (not me) at Eurowerks.
http://gallery.rennlist.com/gallery/CAGEWERK
Keith
http://gallery.rennlist.com/gallery/CAGEWERK
Keith
They are one of the few shops I would allow to build a cage for me.
#7
Race Car
Originally Posted by guns951
Okay guys need a bar for the Cannonball, anyone know of a cage builder?
Trending Topics
#8
Addict
Rennlist Member
Rennlist Member
Join Date: Jun 2001
Location: Concord, NC
Posts: 2,882
Likes: 0
Received 0 Likes
on
0 Posts
Zuffenhaus. That's Keith and Aaron's shop in Indian Trail - same address as Eurowerks in Charlotte.
Go to www.eurowerks.us to get the address/phone
Brian
Go to www.eurowerks.us to get the address/phone
Brian
#10
Cows-4-Rent
Rennlist Member
Rennlist Member
If you need a bar, I will have an autopower for sale very soon. If you need a cage, my shop recommends the Safety Devices for fit and simplicity, much better option than the Autopower bolt on (in their opinion).
Their custom charges were to be about $4,500 vs. the safety devices of $2,500 installed.
Their custom charges were to be about $4,500 vs. the safety devices of $2,500 installed.
#12
The cages on Eurowerks' website look quite well-crafted. I'm not sure the horizontal cross-bracing at the bottom of the both sets of rear legs (to rear suspension and main hoop) is entirely necessary. Especially not with 1.75" DOM.