? max rear camber on SC
#2
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Camber plates are only for McPherson struts, not for the rear suspension of an SC. If you meant the front, I had -2.5 degrees on my Carrera by using a narrower monoball mount & using the strut bar to pull the fender tops together. For the rear, it depends on how much you lower the car, because it gains camber on compression. I ran with -3.0 on mine.
__________________
Larry Herman
2016 Ford Transit Connect Titanium LWB
2018 Tesla Model 3 - Electricity can be fun!
Retired Club Racer & National PCA Instructor
Past Flames:
1994 RS America Club Racer
2004 GT3 Track Car
1984 911 Carrera Club Racer
1974 914/4 2.0 Track Car
CLICK HERE to see some of my ancient racing videos.
Larry Herman
2016 Ford Transit Connect Titanium LWB
2018 Tesla Model 3 - Electricity can be fun!
Retired Club Racer & National PCA Instructor
Past Flames:
1994 RS America Club Racer
2004 GT3 Track Car
1984 911 Carrera Club Racer
1974 914/4 2.0 Track Car
CLICK HERE to see some of my ancient racing videos.