944S2 Track settings
#1
944S2 Track settings
Can anyone recommend allignment settings for an S2. F-class
Details
8.5X18" front
10X18" rear
Hoosiers
Koni adjustables front and rear.
If it helps I'll be running at the Glen.
New car to me so any advice would be appreciated.
Don
Details
8.5X18" front
10X18" rear
Hoosiers
Koni adjustables front and rear.
If it helps I'll be running at the Glen.
New car to me so any advice would be appreciated.
Don
#2
i believe 944 racers with fully done suspensions and wheels/tires like yours would run up to 3.5 degrees neg camber in front with approx 2.5 rear camber.
i've just completed my 968 F suspension with same size wheels.
i ran one day with 2.5 neg front & 3.0 neg rear. i've been trying to tune the understeer/pushing out of the car.
I now have 2.9 neg & 2.5 neg rear now and its better.
racers are using 3.0-3.5 neg front & approx 2.5-2.7 rear neg camber with fully set up suspensions.
hope this helps.
cooz
95 995
94 968
i've just completed my 968 F suspension with same size wheels.
i ran one day with 2.5 neg front & 3.0 neg rear. i've been trying to tune the understeer/pushing out of the car.
I now have 2.9 neg & 2.5 neg rear now and its better.
racers are using 3.0-3.5 neg front & approx 2.5-2.7 rear neg camber with fully set up suspensions.
hope this helps.
cooz
95 995
94 968
#3
I am running -3.0 front and -2.3 in the rear on my 968. The rear is right where it needs to be for my car and the front could use -3.2 to -3.4 to cut down on the outside front tire wear. Stiffen the rear to cut down on understeer.
Mike
Mike