New Company announces 2005 product launch
12-30-2004, 01:06 PM
#1
Instructor
Thread Starter
Join Date: Sep 2003
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
New Company announces 2005 product launch
Official Release:
Powerwerks and Midnight Machineworks have joined forces. This alliance has been forged over the last year and now combines to offer you the highest quality of hand built products and services available for your Porsche. We will be offering our own unique product lines for the 911 and 944 based automobiles.
Collectively we have 11 years of track experience, 16 years of Porsche ownership and 18 years worth of fabrication, engineering and design expertise under our belts. We have also been involved in PCA and PCGB for the past 14 years.
Our products are hand built here in the US and have been designed with a no compromise approach. All design, construction and testing is performed in-house to insure the best quality, fit and performance is achieved.
We are also offering fabrication and restoration services, custom build and installation, car set-up and track consulting.
Starting in February at Sebring, we will be attending many of the major races, PCA and club events throughout the year, offering support from our new trailer facility.
We will be carrying an extensive range of genuine factory parts, performance items and will offer equipment rentals and car consulting services.
From all of us at the Powerwerks team, we look forward to serving you in the future. Please feel free to visit our website at www.powerwerks.net and see what we have to offer. Feel free to contact us with any questions you might have.
Regards, Paul, Keith and James
*** Product release dates and information soon to be announced! ***
Powerwerks and Midnight Machineworks have joined forces. This alliance has been forged over the last year and now combines to offer you the highest quality of hand built products and services available for your Porsche. We will be offering our own unique product lines for the 911 and 944 based automobiles.
Collectively we have 11 years of track experience, 16 years of Porsche ownership and 18 years worth of fabrication, engineering and design expertise under our belts. We have also been involved in PCA and PCGB for the past 14 years.
Our products are hand built here in the US and have been designed with a no compromise approach. All design, construction and testing is performed in-house to insure the best quality, fit and performance is achieved.
We are also offering fabrication and restoration services, custom build and installation, car set-up and track consulting.
Starting in February at Sebring, we will be attending many of the major races, PCA and club events throughout the year, offering support from our new trailer facility.
We will be carrying an extensive range of genuine factory parts, performance items and will offer equipment rentals and car consulting services.
From all of us at the Powerwerks team, we look forward to serving you in the future. Please feel free to visit our website at www.powerwerks.net and see what we have to offer. Feel free to contact us with any questions you might have.
Regards, Paul, Keith and James
*** Product release dates and information soon to be announced! ***
01-02-2005, 09:13 PM
#2
Instructor
Thread Starter
Join Date: Sep 2003
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
OK, Sorry for the long delay. We prefer to wait and show parts that are complete.
Here are some pictures of our 3" dump tube. All joints are welded inside as well as outside, which makes the part stronger. Each piece is hand cleaned, sanded and polished for a smoother inside/outside finish ...... all of which makes for better flow and a much nicer quality piece!
The cat back is 95% done and will be up soon. We are also working on the test pipe and will post once that's done. Product release will be by the end of February at the latest.
Here are some pics of our floor boards....... available for driver and passenger side.
These are race proven and much stronger in construction then current boards on the market.
911 Floorboards
• Machined from 5056 Al using water jet process.
• Anodized to protect finish (custom colors available).
• Available for all 911 body styles from ‘65-’89.
• Cutouts allow linkage adjustment without removing the floorboard
• Coming Soon: 964, 993 and 944 Floorboards!
Here are some pics and information on our 911 Exhaust System
911 Exhaust System
• Custom tuned exhaust for the 3.2L 911 motor.
• System weight= 26lbs.
• System includes all mounting hardware.
• Dyno results 219rwhp with 195ft/lbs of torque.
• Meets 89dB rating for local racing venues (Lime Rock Park and Mt. Tremblant).
If anyone has any questions, please feel free to contact us.
Cheers,
Paul
Here are some pictures of our 3" dump tube. All joints are welded inside as well as outside, which makes the part stronger. Each piece is hand cleaned, sanded and polished for a smoother inside/outside finish ...... all of which makes for better flow and a much nicer quality piece!
The cat back is 95% done and will be up soon. We are also working on the test pipe and will post once that's done. Product release will be by the end of February at the latest.
Here are some pics of our floor boards....... available for driver and passenger side.
These are race proven and much stronger in construction then current boards on the market.
911 Floorboards
• Machined from 5056 Al using water jet process.
• Anodized to protect finish (custom colors available).
• Available for all 911 body styles from ‘65-’89.
• Cutouts allow linkage adjustment without removing the floorboard
• Coming Soon: 964, 993 and 944 Floorboards!
Here are some pics and information on our 911 Exhaust System
911 Exhaust System
• Custom tuned exhaust for the 3.2L 911 motor.
• System weight= 26lbs.
• System includes all mounting hardware.
• Dyno results 219rwhp with 195ft/lbs of torque.
• Meets 89dB rating for local racing venues (Lime Rock Park and Mt. Tremblant).
If anyone has any questions, please feel free to contact us.
Cheers,
Paul
01-04-2005, 11:21 AM
#4
Addict
Rennlist
Lifetime Member
Rennlist
Lifetime Member
I can't find any information on the 3.2 headers on your website. The only link that seems to be active under "911 Products" is the "Brakes" section. What is the cost for the complete exhaust system? It looks very nice. Is it 1-5/8" ID on the primaries? Are those Coast Fab mufflers on the ends? Has it really tested under 89 db on a full-tilt 3.2 engine?
Thx,
TT
Thx,
TT