WTB: Crawford Wing, Splitter - 996 Cup
12-04-2012, 08:09 PM
#32
Rennlist Member
OK,
Got my first two pairs of wing uprights from the shop today.
Again, these are exact (or exact as a CMM will get me) replicas of the stock uprights, only 3 inches taller. (which I understand to be the height of the grand am or Crawford upright)
It has the same holes in the same positions as the stock upright. All of the same mounting holes and the same wing adjusting holes.
All of the adjusting holes fit with all 3 of the wing holes, so everything fits and fits well.
Here are a couple of pictures. The first is one set that is mounted on the car with the wing. The second and third pictures show a comparison in size to the stock uprights.
The nuclear symbol is for me. I work in the nuclear industry. If I have enough interest, I can make more of these. With the nuke symbol, without, I would let consensus tell me what I should have on the side. I can do a GT3 or pretty much anything.
The cost would be $225 if you would like it plain, or $250 powdercoated black.
More, if you would like a custom cut out. (only because I would get charged more for a single setup.
Oh yea, this is for a 6Cup. I am not sure the mounting sizes of the 7Cup.
Thanks
Ed
Got my first two pairs of wing uprights from the shop today.
Again, these are exact (or exact as a CMM will get me) replicas of the stock uprights, only 3 inches taller. (which I understand to be the height of the grand am or Crawford upright)
It has the same holes in the same positions as the stock upright. All of the same mounting holes and the same wing adjusting holes.
All of the adjusting holes fit with all 3 of the wing holes, so everything fits and fits well.
Here are a couple of pictures. The first is one set that is mounted on the car with the wing. The second and third pictures show a comparison in size to the stock uprights.
The nuclear symbol is for me. I work in the nuclear industry. If I have enough interest, I can make more of these. With the nuke symbol, without, I would let consensus tell me what I should have on the side. I can do a GT3 or pretty much anything.
The cost would be $225 if you would like it plain, or $250 powdercoated black.
More, if you would like a custom cut out. (only because I would get charged more for a single setup.
Oh yea, this is for a 6Cup. I am not sure the mounting sizes of the 7Cup.
Thanks
Ed
12-04-2012, 08:42 PM
#33
Former Vendor
we have a pair of porsche rolex grand am crawford wings for sale.
$1200 each without uprights.
and then we have a 997 RSR wing for sale, $1700
PM if interested.
$1200 each without uprights.
and then we have a 997 RSR wing for sale, $1700
PM if interested.
12-05-2012, 07:12 PM
#35
Nordschleife Master
Join Date: Oct 2004
Location: Vacuuming Cal Speedway
Posts: 7,306
Likes: 0
Received 7 Likes
on
5 Posts
I have a NIB World Speed Challenge 996 front bumper as pictured below. It's not for sale, but could be borrowed locally if someone wants to make a mold....
PS: Big wings slow you down. You think you have understeer now, try it with a RSR wing. The 60' wing is plenty wide, just use the taller uprights to get cleaner air.....
PS: Big wings slow you down. You think you have understeer now, try it with a RSR wing. The 60' wing is plenty wide, just use the taller uprights to get cleaner air.....
12-05-2012, 08:37 PM
#38
Nordschleife Master
I have a NIB World Speed Challenge 996 front bumper as pictured below. It's not for sale, but could be borrowed locally if someone wants to make a mold....
PS: Big wings slow you down. You think you have understeer now, try it with a RSR wing. The 60' wing is plenty wide, just use the taller uprights to get cleaner air.....
PS: Big wings slow you down. You think you have understeer now, try it with a RSR wing. The 60' wing is plenty wide, just use the taller uprights to get cleaner air.....
12-05-2012, 08:43 PM
#39
Nordschleife Master
12-05-2012, 08:51 PM
#40
Race Car
Thread Starter
Thank JRG - I was just thinking that ie why not just start with the uprights and maybe a gurney flap?
Re your splitter - is there much undertray?
And Ed thanks for the pics! FF will mail you later.
Re your splitter - is there much undertray?
And Ed thanks for the pics! FF will mail you later.
12-06-2012, 12:55 AM
#41
Nordschleife Master
Join Date: Oct 2004
Location: Vacuuming Cal Speedway
Posts: 7,306
Likes: 0
Received 7 Likes
on
5 Posts
Yes the undertray goes back quite a bit with vents. It's up in the rafters, maybe I'll get it down tomorrow and shoot a pic.
We have a guy locally who makes molds and splitters as pictured in my avatar. That splitter is angeled downward and leaves little room for air to get under the car. The WSC splitter on Wolfie's car goes out level but with a big-*** lip. I'm not sure which splitter is more effective. I'll give him a call tomorrow and see what he wants to produce the WSC version...
12-06-2012, 01:57 AM
#42
Race Car
Thread Starter
I'm having too much trouble shipping the big stuff down here .... Ie $1000 seems the min for shipping due to size equivalent wgt issues.
Vents - do you mean for the brake ducts?
Vents - do you mean for the brake ducts?
12-06-2012, 10:58 AM
#44
Race Car
Thread Starter
thanks JRG - a friend just bought this monster and it has a massive/beautiful front splitter..
which I can now access and copy ... thinking Kevlar for durability, else CF.
Think FB won't have the strength to withstand the Venturi
GT2 **** for sale .... SOLD!
which I can now access and copy ... thinking Kevlar for durability, else CF.
Think FB won't have the strength to withstand the Venturi
GT2 **** for sale .... SOLD!
12-23-2012, 06:48 PM
#45
These have a nuclear symbol cut in the side ('cause I work for a company that makes parts for the nuke plants) but I can have them do just about anything within reason.
Obviously if I can standardize on something it would be cheaper, but custom is always an option for a bit more money. I do not have a font for the GT3 that is on the side of the stock upright right now, but I am sure that would not be hard to get my hands on.
Obviously if I can standardize on something it would be cheaper, but custom is always an option for a bit more money. I do not have a font for the GT3 that is on the side of the stock upright right now, but I am sure that would not be hard to get my hands on.
http://www.logotypes101.com/free_vector_logo/31959/GT3