**SOLD**FS: 997 RSR BBS 3-Piece Wheels & Complete F&R Uprights
#1
Drifting
Thread Starter
**SOLD**FS: 997 RSR BBS 3-Piece Wheels & Complete F&R Uprights
997 RSR BBS 3-Piece Wheels
Rear - 13J x 18 offset 12.5 mm
Front - 11J x 18 offset 34 mm
From 2009 Car - not immaculate, but as expected from an actively raced RSR. No bends or leaks. Individual/better pics on request.
$2,500 shipped to Lower 48
Also, 2 Front, 2 Rear RSR Uprights w/ 4.5hrs complete with RSR Hubs & Drive Pins.
$2,800 shipped to lower 48 (selling as set of 4 only).
The part numbers for the uprights are:
997 331 611 AR AS 01
997 341 658 AR AS 001
Rear - 13J x 18 offset 12.5 mm
Front - 11J x 18 offset 34 mm
From 2009 Car - not immaculate, but as expected from an actively raced RSR. No bends or leaks. Individual/better pics on request.
$2,500 shipped to Lower 48
Also, 2 Front, 2 Rear RSR Uprights w/ 4.5hrs complete with RSR Hubs & Drive Pins.
$2,800 shipped to lower 48 (selling as set of 4 only).
The part numbers for the uprights are:
997 331 611 AR AS 01
997 341 658 AR AS 001
Last edited by FLA997; 03-15-2012 at 03:18 PM. Reason: Price Update
#6
Drifting
Thread Starter
Very rare bits...and $$$
BBS Motorsports is the source. FVD also sells them for around $11k+ per set
These centers are for R/RSR conical mating...they wont work on anything else (Cups or street cars).
BBS Motorsports is the source. FVD also sells them for around $11k+ per set
These centers are for R/RSR conical mating...they wont work on anything else (Cups or street cars).
#7
Call Gordon at Autometrics, he had a few sets of RSR wheels for sale:
843.763.6740
http://www.autometricsmotorsports.com/
843.763.6740
http://www.autometricsmotorsports.com/
Trending Topics
#8
Wheels
Thanks for the info and for the tips.
I have 997 RSR hubs with the conical nut so I have no other option than locking for wheels like this.
And due to I have a GT2 body I need the 3 piece center to build wheels that fit the (narrow) body.
Emil Larsson
I have 997 RSR hubs with the conical nut so I have no other option than locking for wheels like this.
And due to I have a GT2 body I need the 3 piece center to build wheels that fit the (narrow) body.
Emil Larsson
#9
Rennlist Member
Change the hub or the upright, if i understand it right you are building a street car so no need for centerlook then.
Also the rsr centerlook nut should be replaced often
Also the rsr centerlook nut should be replaced often
#11
Rivardcompe is this something you can consider sharing!
If so please email me on emil.larsson82@hotmail.se.
Best regards
Emil
If so please email me on emil.larsson82@hotmail.se.
Best regards
Emil
#12
Rennlist Member
Also dont forget rsr upright are made for a specific ride height not for street use
To many persons think its cool to use RSR stuff but have no ide they are making the car handle worse then before
To many persons think its cool to use RSR stuff but have no ide they are making the car handle worse then before