FS Porsche GT3 RSR Motorsport Parts and 18" BBS Race Wheels
#94
Former Vendor
Thread Starter
Join Date: Dec 2008
Location: Fremont, CA
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Thank for the feedback guys!
Lordpants.... The bar motion ratios are quite different for the 996 and 997 cars. The effective arm length is shorter on the RSR compared to the cup cars etc so you probably shouldn't copy a bar unless it's for the same car you own. If you email me specific questions, I'll try to answer them.
Mark
mark@mathisengineering.com
Lordpants.... The bar motion ratios are quite different for the 996 and 997 cars. The effective arm length is shorter on the RSR compared to the cup cars etc so you probably shouldn't copy a bar unless it's for the same car you own. If you email me specific questions, I'll try to answer them.
Mark
mark@mathisengineering.com
#98
Former Vendor
Thread Starter
Join Date: Dec 2008
Location: Fremont, CA
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Yes. I have 996 RSR, 997 RSR and Daytona Prototype intakes manifolds, heads, and headers. I'll need to know what year motor you are building to confirm that I have exactly what you need.
Mark
#99
Race Car
Hey Mark - thanks for all the effort finding me those bits and bobs - you've been super helpful and I appreciate the attention. Thanks again for the pics and advice. I look forward to an early xmas!
Matt
Matt
#100
Race Car
Hey Mark - thanks for the outstanding service.
All arrived, customs were as expected ie good and much appreciate the extra bits packed so nicely in around the steering pump.
And thanks for the clear instructions and extra piece to make fitting easy.
Matt
All arrived, customs were as expected ie good and much appreciate the extra bits packed so nicely in around the steering pump.
And thanks for the clear instructions and extra piece to make fitting easy.
Matt
#101
Former Vendor
Thread Starter
Join Date: Dec 2008
Location: Fremont, CA
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the good word. I'm glad it all worked out for you.
#103
Former Vendor
Thread Starter
Join Date: Dec 2008
Location: Fremont, CA
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
#104
Rennlist Member
Can you email me pricing for new and good used one for cup cables as well?
Chasen1211@gmail.co
Thanks!
Chasen1211@gmail.co
Thanks!