May-be a stupid question ,But how does one go about getting the ECU unlocked on a 27 cup,as engine will need a retune after mods.

 

Try again 07 997gt3 cupcar. I don't think the Australian Porsche Dealers are interested , but in the USA it seems that it is a regular occurance. ??????

 

In general Porsche motorsports are the only people who can do anything to the cup car ecu. Street cars use a different ecu and the dealers can't plug into a cup car. There are a few people around who may be able to "hack" the ecu....but good luck finding them. This is one of the main reasons I went with a motec ecu on my current project.

 

Phil, owner of Eurotek Designs in New York, designs and modify's many high profile Porsche race motor ECU's for Gran Am, etc. Call him....

http://www.eurotekdesigns.com/main.html

 

There are only a handfull of Guys that can work with the 3.1 Motorsport ECU...and Phil is not one of them...

If you are looking to flash the ECU for a different year or HP "stock" Porsche motor then PMNA can do that for a few hundred dollars, but if you have built a custom engine then you have to Seek out a very special couple of guys.....

 

Rick is right.Eurotek Designs is not the place to have ECU mods made to a cup ECU . Their web has stolen dyno graphs from an Australian tuners web site.
Poor effort!!!!!!

 

very interesting , I'm looking for someone in europe who can put the my 2010 map in 2007 3.1 Ecu , my engine is all 3800 2010 spec ...

 

Where in Europe? I just had my 07 3.6 converted into 4.0 and tuned. Lammertink racing and engineering in Holland.

 

I'm pretty sure Mitchell Simmons, the data guy over at Paul Miller Racing can crack it. Though he's a very busy man...

 

thanks! I send an email to them ,thank you !

I asked Manthey and others "big" teams and they say that it's not possible...

 

Have you asked Porsche Motorsport in Germany. They should be able to just reflash it for you.

 

i asked in motorsport , they sell new ecu ( 4500 euro )

bad news from Lammertink ...

Dear Sir,

Thank you for your question. We cannot put a map in to your computer. The car must be on the dyno first to map it. Each car is different.

Met vriendelijke groeten,

Arjan Brinkcate
Service - Parts - Racing

 

each car is different ?

i think that all 2010 car have the same map ....

 

Kind of goes against "as delivered" doesn't it?

 

does anyone have the cup 2010 map file ? I've found the solution...maybe ...