Demon Speed New Products release RSR Engine Bracket and Hirschmann Rod Ends
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Demon Speed New Products release RSR Engine Bracket and Hirschmann Rod Ends
Demon Speed Motorsports is proud to introduce this RSR based design engine mount plate for the GT3 and Cup cars.
Stronger than the original, this engine plate is a great alternative to the stamped steel factory engine plate which is prone to fatigue and failure.
Fits
993
996 GT3, Turbo, Cup
997 GT3, Turbo, Cup
Currently on sale at a introductory price
Demon Speed Alignment Gauge
We had been frustrated with using a tape measure along with smart strings to measure the toe reading.
Constantly going from front to back of the wheel to get the measurement. We wanted to have an easier way to take both readings at the same time.
Demon Speed has developed a very simple tool to use along with products like the smart strings. The Demon Speed alignment bar allows you to see your toe measurement in one look. No more going back and forth with a tape measure.
The Demon Speed alignment bar has two machinist scales mounted to the face. Place the alignment bar up to the tire to achieve the readings to the front and the rear of the tire directly.
The machinist scales are reversible, so readings can be taken in English or metric just by flipping over the scales.
Our current alignment bar is made to fit 18" or 19" wheels and tires. More sizes to come.
Demon Speed Motorsports is now carrying Hirschmann Rod Ends.
These are the same rod ends used by Porsche originally in the factory racing applications. They are the SMXCP series which are the high strength version for long life.
Demon Speed Motorsports currently carries the 14mm left and right hand and the 16mm left and right hand male rod ends in stock.
We can also substitute Hirschmann rod ends for the standard rod ends in any of the suspension products that we sell for an additional charge.
Demon Wings are nearly here:
This We are getting ready to launch our new line of wings. We have named them Demon Wings. Angel wings might lift you up while ours pull you down.
Our wings, unlike most on the market, are made from clear carbon fiber, so you not only get the strength and light weight of the carbon fiber construction, but because they are clear, not black gel coat, show off the beauty of the carbon fiber weave.
Pricing for the new wings will be at $1875. The wings that will be offered are 996 profile and length and 997.1 Cup profile and length.
These are legal for PCA GTC3 and 4
We do also have a Factory 997.1 Wing new and in the box for sale
Stronger than the original, this engine plate is a great alternative to the stamped steel factory engine plate which is prone to fatigue and failure.
Fits
993
996 GT3, Turbo, Cup
997 GT3, Turbo, Cup
Currently on sale at a introductory price
Demon Speed Alignment Gauge
We had been frustrated with using a tape measure along with smart strings to measure the toe reading.
Constantly going from front to back of the wheel to get the measurement. We wanted to have an easier way to take both readings at the same time.
Demon Speed has developed a very simple tool to use along with products like the smart strings. The Demon Speed alignment bar allows you to see your toe measurement in one look. No more going back and forth with a tape measure.
The Demon Speed alignment bar has two machinist scales mounted to the face. Place the alignment bar up to the tire to achieve the readings to the front and the rear of the tire directly.
The machinist scales are reversible, so readings can be taken in English or metric just by flipping over the scales.
Our current alignment bar is made to fit 18" or 19" wheels and tires. More sizes to come.
Demon Speed Motorsports is now carrying Hirschmann Rod Ends.
These are the same rod ends used by Porsche originally in the factory racing applications. They are the SMXCP series which are the high strength version for long life.
Demon Speed Motorsports currently carries the 14mm left and right hand and the 16mm left and right hand male rod ends in stock.
We can also substitute Hirschmann rod ends for the standard rod ends in any of the suspension products that we sell for an additional charge.
Demon Wings are nearly here:
This We are getting ready to launch our new line of wings. We have named them Demon Wings. Angel wings might lift you up while ours pull you down.
Our wings, unlike most on the market, are made from clear carbon fiber, so you not only get the strength and light weight of the carbon fiber construction, but because they are clear, not black gel coat, show off the beauty of the carbon fiber weave.
Pricing for the new wings will be at $1875. The wings that will be offered are 996 profile and length and 997.1 Cup profile and length.
These are legal for PCA GTC3 and 4
We do also have a Factory 997.1 Wing new and in the box for sale
__________________
https://demonspeed.com/
Engineered Race and Track Products for your Porsche
https://www.goodaero.com/
Race Designed Aerodynamics
https://racingtirewarmers.com/
Win more races with tire warmers
Great products for racers by racers
ed@demonspeed.com
Demon Speed Motorsports is a proud sponsor of PCA and the Club Racing Program
https://demonspeed.com/
Engineered Race and Track Products for your Porsche
https://www.goodaero.com/
Race Designed Aerodynamics
https://racingtirewarmers.com/
Win more races with tire warmers
Great products for racers by racers
ed@demonspeed.com
Demon Speed Motorsports is a proud sponsor of PCA and the Club Racing Program