991 cup car race ramps, angle of attack of front nose
05-07-2018, 04:34 PM
#1
Three Wheelin'
Thread Starter
991 cup car race ramps, angle of attack of front nose
any of you all using race ramps with your 991 cups and maybe have like an ATC stacker or thereabouts. 90"inch rear door length about 20 inches off the ground.
curious what length ramp worked. have room for the longest they make but the 11 footer doesnt have the groove for the flip out flap.
either i take off the flip/flap and go 11, or they have a 9footer with room for the flap.
curious what you have all used.
curious what length ramp worked. have room for the longest they make but the 11 footer doesnt have the groove for the flip out flap.
either i take off the flip/flap and go 11, or they have a 9footer with room for the flap.
curious what you have all used.
05-07-2018, 05:01 PM
#2
any of you all using race ramps with your 991 cups and maybe have like an ATC stacker or thereabouts. 90"inch rear door length about 20 inches off the ground.
curious what length ramp worked. have room for the longest they make but the 11 footer doesnt have the groove for the flip out flap.
either i take off the flip/flap and go 11, or they have a 9footer with room for the flap.
curious what you have all used.
curious what length ramp worked. have room for the longest they make but the 11 footer doesnt have the groove for the flip out flap.
either i take off the flip/flap and go 11, or they have a 9footer with room for the flap.
curious what you have all used.
https://www.reverselogic.us/shop.htm...624542ed9a324b
05-07-2018, 08:10 PM
#3
Got a trailer with the ramp and flip ramp built to the angle of the Cup nose 
