FS: Hawk DTC-60 996 GT3 / cup fitment -used
#1
Race Car
Thread Starter
FS: Hawk DTC-60 996 GT3 / cup fitment -used
For sale is a set of DTC-60 hawk track pads with 996 GT3 fitment. Fronts will also fit 997.1 GT3 and Rears also have a wide variety of fitments. Please double check part numbers online if there is any doubt:
Front: HB483G.635
Rear: HB291G.642
Both sets have a factory thickness of 16mm starting off. The fronts measure between 13.6 and 14.2 mm across the pad (slight taper) putting them > 80% remaining. Rears measure from 10.5-11.2 putting them around 65% remaining.
Best I've seen new is around $550 plus shipping for both axles.
Asking $175 shipped within the lower 48.
Thanks,
Front: HB483G.635
Rear: HB291G.642
Both sets have a factory thickness of 16mm starting off. The fronts measure between 13.6 and 14.2 mm across the pad (slight taper) putting them > 80% remaining. Rears measure from 10.5-11.2 putting them around 65% remaining.
Best I've seen new is around $550 plus shipping for both axles.
Asking $175 shipped within the lower 48.
Thanks,
#3
Race Car
Thread Starter
Ran hawks for 4 years and loved them but decided to switch to performance friction pads. Not sure the PFC’s are worth nearly double the price but I don’t see trying to put these back on and rebedding for different pad compound.
I think i found even more dtc fronts in my spares bin this weeekd I’ll get pictures and throw them in if they are worth having.
I think i found even more dtc fronts in my spares bin this weeekd I’ll get pictures and throw them in if they are worth having.