Looking for a 3.6 996 RS conrod
#2
Rennlist Member
#6
Instructor
Hi Cedric
I have 6 sets of conrods for 996GT3 Cup cars ,all in perfect condition I also have all the other parts of the engines , plus gearbox parts for the 996 GT3 Cup cars , I will only sell a set of 6 con rods but you can choose , I am in England 1- 1/2 hour from Dover and will take Euros
Jim
I have 6 sets of conrods for 996GT3 Cup cars ,all in perfect condition I also have all the other parts of the engines , plus gearbox parts for the 996 GT3 Cup cars , I will only sell a set of 6 con rods but you can choose , I am in England 1- 1/2 hour from Dover and will take Euros
Jim
Trending Topics
#8
#9
i just looked at mine. Not sure how to tell weight class. They all have a V and a number like 208 or 220 stamped in one side of the big end. Half of them have an "A" and half have a "D" more crudely (looks by free hand) engraved in the opposite side of the big end....
#10
Rennlist Member
Thread Starter
Hi Clay,
Many thanks. What I am going to do is to weight mine as soon as I get a hand on them and will let you know. If you have the possibility to weight them accurately, I think it will be easier.
I will weight them without bearings, nor bolts.
Would you have a pic ?
Thanks for your help.
Many thanks. What I am going to do is to weight mine as soon as I get a hand on them and will let you know. If you have the possibility to weight them accurately, I think it will be easier.
I will weight them without bearings, nor bolts.
Would you have a pic ?
Thanks for your help.
#11
Hi Cedric
Are these any good ?
Regards
James
ps.....calipers are coming along nicely....new paint this week
!
..edit.....link would help!
http://www.ebay.co.uk/itm/253061891414
Are these any good ?
Regards
James
ps.....calipers are coming along nicely....new paint this week
!
..edit.....link would help!
http://www.ebay.co.uk/itm/253061891414
Last edited by jimk04; 09-05-2017 at 03:13 AM.
#12
Hi Clay,
Many thanks. What I am going to do is to weight mine as soon as I get a hand on them and will let you know. If you have the possibility to weight them accurately, I think it will be easier.
I will weight them without bearings, nor bolts.
Would you have a pic ?
Thanks for your help.
Many thanks. What I am going to do is to weight mine as soon as I get a hand on them and will let you know. If you have the possibility to weight them accurately, I think it will be easier.
I will weight them without bearings, nor bolts.
Would you have a pic ?
Thanks for your help.
#13
Rennlist Member
Thread Starter
Hello,
Just to be more precise, here is what I am after (see pic for general idea. unfortunately, there is no part number on the rods, to be sure of what we are talking about.
In "E" weight class, the ones I have are in the 368-370 grams without anything (bolt, nut, bearing... only the bare two parts conrod)
@Jim : Thanks ;-) These are 3.6 996/997 cup engine rods, not RS one, they are not constructed to same way, and are heavier. Happy you brought these calipers to life so quickly ;-)
996 RS conrods
Many thanks for everyone's kind help ! I am getting close ! ;-)
Cedric
Just to be more precise, here is what I am after (see pic for general idea. unfortunately, there is no part number on the rods, to be sure of what we are talking about.
In "E" weight class, the ones I have are in the 368-370 grams without anything (bolt, nut, bearing... only the bare two parts conrod)
@Jim : Thanks ;-) These are 3.6 996/997 cup engine rods, not RS one, they are not constructed to same way, and are heavier. Happy you brought these calipers to life so quickly ;-)
996 RS conrods
Many thanks for everyone's kind help ! I am getting close ! ;-)
Cedric