TRG Monoball Strut Tower and Camber plates
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Aug 2001
Location: Folsom, CA
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
TRG Monoball Strut Tower and Camber plates
I have a 01 C4 that I track about 12-15 times a year and street drive about 4-5 days a month and I'm thinking about installing Racer's Group monoball strut tower and camber plates and I would like to know how they are for street driving as far as ride and transfering road noise.
I'm also thinking about Bilstein PSS9's and would like get feedback on this mod also.
Thanks
I'm also thinking about Bilstein PSS9's and would like get feedback on this mod also.
Thanks
#2
Addict
Rennlist Member
Rennlist Member
Hey;
Although I doubt it would be to objectionable levels, road noise/vibration is likely all you would notice if you put spherical strut bearings in, asside from easier adjustment.
I'm sure the Bilsteins are very high quality, but they seem to offer relatively little adjustment for a lot of money to me. However, judging by your tagline, money is not a problem!!
Although I doubt it would be to objectionable levels, road noise/vibration is likely all you would notice if you put spherical strut bearings in, asside from easier adjustment.
I'm sure the Bilsteins are very high quality, but they seem to offer relatively little adjustment for a lot of money to me. However, judging by your tagline, money is not a problem!!