Mark this thread as Unsold
WTB: Werks1 Rear Diffuser 997.2 TTS
#1
Pro
Thread Starter
WTB: Werks1 Rear Diffuser 997.2 TTS
Howdy, looking for a Werks1 Rear Diffuser for a 997.2 TTS, if you have one you'd like to sell pls PM me. Thank you!!! JB
http://www.championmotorsport.com/pr...1-997t-dfc.htm
Scammers need not apply...so don't. Let's just say I'm not the one. A fellow off-duty agent will be involved to inspect the item prior to payment. New members with no to little activity will not be contacted....JB
http://www.championmotorsport.com/pr...1-997t-dfc.htm
Scammers need not apply...so don't. Let's just say I'm not the one. A fellow off-duty agent will be involved to inspect the item prior to payment. New members with no to little activity will not be contacted....JB
#2
Rennlist Member
Hey John,
If you find one, make sure its for a 997.2 and not for a dot one. A dot one will not work on dot two. Different motors, thus different shape to the diffuser. Also, do not run aftermarket headers, stick with stock for clearance.
Cheers,
VID
If you find one, make sure its for a 997.2 and not for a dot one. A dot one will not work on dot two. Different motors, thus different shape to the diffuser. Also, do not run aftermarket headers, stick with stock for clearance.
Cheers,
VID
#3
Pro
Thread Starter
It's a long shot, but worth a shot. Great advice.!! Thanks, JB
#5
I have the .1 and run TUBI headers and mufflers as part of the Champion F77 powerkit and fit OK.. if you find a .2 it may work with other headers...see what the champion werks set up is for the 997.2 as likely they run aftermarket headers/exhaust with this diffuser... not suggesting a .1 will fit a .2 but just that if you find a .2 and run after market headers maybe OK... would call werks1 champion to find out..
Last edited by mickfluff; 01-15-2017 at 07:28 PM.
#6
Rennlist Member
Turbo application/diffuser differs from the NA F77 diffuser....two different pieces.
Below is a picture of a dot one turbo diffuser with aftermarket headers. Note the burn holes. Also note the fore mounting points and how they differ from a dot two turbo and dot one or dot NA F77.
Below is a picture of a dot one turbo diffuser with aftermarket headers. Note the burn holes. Also note the fore mounting points and how they differ from a dot two turbo and dot one or dot NA F77.
#7
Pro
Thread Starter
I have the .1 and run TUBI headers and mufflers as part of the Champion F77 powerkit and fit OK.. if you find a .2 it may work with other headers...see what the champion werks set up is for the 997.2 as likely they run aftermarket headers/exhaust with this diffuser... not suggesting a .1 will fit a .2 but just that if you find a .2 and run after market headers maybe OK... would call werks1 champion to find out..