JMM, I saw this note you recently had:


Join Date: Feb 2010
Posts: 80

Default
Both the configurable dash dial (one of the options on the right hand dial, accessed by the right thumb roll switch on the steering wheel) and the PCM screen are programmable (check your owner's manual). Once you have programmed them with the display you desire, set them as permanent on the three buttons (set, 1, 2, and off) on the driver's door by touching the off button until the light goes out, touching the set button until you hear a tone while pressing 1 or 2 or both. It should stay the way you set it. However, if you don't have the configurable dial selected or the PCM screen set to something else, you may miss it.

How do I program the PCM clock? I programmed the clock in the dashboard which shows the correct time but the PCM time is completely wrong