Rennlist - Porsche Discussion Forums - View Profile: CBR786


CBR786 CBR786 is offline


About Me

  • About CBR786
    C2 cab LHD 996 C4 tip Cab RHD 996 TURBO S
    Birmingham UK


Total Posts
Visitor Messages
Total Likes
General Information
  • Last Activity: 05-04-2019 01:21 PM
  • Join Date: 12-26-2009

Visitor Messages

Showing Visitor Messages 1 to 10 of 10
  1. 07-15-2014 09:45 AM
    That's great cheers, think found the place, just in the messy process of stripping it all down!! Will give them a shout as going to at least get the alternator fan and shroud done. Also, useful to know as well if I'm stuck ta, much appreciated. Cheers, Paul
  2. 06-30-2014 09:21 AM
    No probs, same here! Live in Sutton Coldfield, noticed your status is Birmingham so was hoping there was some place local. Thanks.
  3. 06-19-2014 08:05 AM
    Hi, just reading your post on valve cover powder coating as just in the process of trying to sort out the dreading oil leaks so doing a raft of stuff at the same time. Have you details of the powder coaters please? Looking at the pics looks a good job. Thanks, Paul
  4. buck_31
    07-08-2013 02:05 PM
    Sorry but the item is sold
  5. swaini
    02-15-2013 05:08 AM
    salam, sorry for the late reply. i got the shop to order new door, bottom sills, bonnet seals. we could have used some of the old ones but to sleep better at night we decided to go with new ones. good luck with your respray, which color? post some pics. have a nice day.
  6. 964russ
    02-11-2013 05:50 PM
    Hi, with regards to paint. It all depends on money, how far do you want to go?
    In an ideal world you,d remove everything, bare metal re-paint.
    In the real world removing only 1 wing will work fine, the only issue will be removing/refitting the wing trim (the rubber piece that splits the scuttle from the wing).
    Not impossible but doable.
    And the spoiler is removable from the lid so no issues there.
  7. GazC2
    02-10-2013 02:22 PM
    Lemass has a paint shop and would probably be able to give you good advice and in regards your rust repairs I was talking to Rob at www, and seem good but I may have found someone nearer to home another user Fuch also has an old school bodywork guy that may be worth a try , I am plodding away cleaning/refurning/prepping the multitude of bits that comes off.
  8. GazC2
    02-10-2013 02:22 PM
    I have been using the bilt hamber high zinc , on some of the bumper brackets that were good enough to save and touching up any area`s in the wheelarches that need touched up and then spraying on top, I haven`t cleaned the inner wing up as you have done yet but my intention was the bilt high zinc and then spray it on top, a few different options you dont want the bare metal sitting for any length of time ideally you want to seal it as soon as you have taken it back to bare metal Por do a good product called metal ready (available from frosts) that you brush on again gives it a zinc coating most paint shops will give it a coat of epoxy primer .


  9. Vincent C.
    04-20-2011 05:38 PM
    sorry don't i the wrong person you are looking for....
  10. 03-26-2010 04:53 PM
    hi yes i thought i would give you some advice dont get simon at pro 9 to touch your car! his brother is a sprayer he will say they send it to some one and charge you for transport etc and the spray shop is next door to his workshop! your parts will go missing or be replaced and a whole load off other things!

Contact Us - About Us - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.