HRE P101 with SC2 - 991.1 and .2 GT2RS and GT3RS fitment
For SaleWheels and Tires/Axles
05-05-2023, 10:01 AM | Replies: 15 | Views: 3614
Description:
Had these on my .1 RS and took them off when I traded the car to the dealer. Thought I would put them on my .2 RS, but my wife loved the gold wheels that were on it, so these never made it on. They have been sitting in my cabinets for a couple of years, so thought I'd see if anyone had interest. Tires probably have 1,500 +/- miles on them. No track time, all on the street. I can't find my depth gauge, but I doubt there's more than 1/32 of wear on them, so they are near new. Located in Houston, and would prefer local pick up. However, I can put them on a pallet and ship from my business on the buyer's dime if needed. No chips or scratches on them.
#3
Rennlist Member
Thread Starter
![Default](images/icons/icon1.gif)
I wanted to update this post since a fellow RL'er came by on Saturday to look at these and found the rear wheel was the factory width and offset (12.5 ET 48), but the front has 5mm less offset (ie, ET45 instead of ET50). Same width (9.5). I've had these on both a .1 and .2 GT3RS and there was no issue with clearance on either car.
Trending Topics
#8
Rennlist Member
Thread Starter
#14
Rennlist Member
Thread Starter
![Default](images/icons/icon1.gif)
I had another RL'er send me a message asking the same question. The honest answer is I'm not sure. This is the info I sent him after a little research:
That is a good question... Not sure I have a definitive answer, but here is what I found on a wheel spec website I use frequently:
Turbo S front wheel is 8.5x20 ET 51
Turbo S rear wheel is 11x20 ET 59
OR
Turbo S front wheel is 9x20 ET 51
Turbo S rear wheel is 11.5x20 ET 56
The wheels I have are:
Front 9.5x20 ET 51
Rear 12.5x21 ET 48
Using an offset calculator it looks like the rear wheels I have would stick out about .8" further than your wheels, and the fronts would stick out about .25" more than your current wheels. I think the front would be fine since that offset is about the same difference from a factory GT3RS setup, but the rear might be pretty aggressive. I'm not sure how tucked the rear wheels are on your car, so you would have to make that call.
That is a good question... Not sure I have a definitive answer, but here is what I found on a wheel spec website I use frequently:
Turbo S front wheel is 8.5x20 ET 51
Turbo S rear wheel is 11x20 ET 59
OR
Turbo S front wheel is 9x20 ET 51
Turbo S rear wheel is 11.5x20 ET 56
The wheels I have are:
Front 9.5x20 ET 51
Rear 12.5x21 ET 48
Using an offset calculator it looks like the rear wheels I have would stick out about .8" further than your wheels, and the fronts would stick out about .25" more than your current wheels. I think the front would be fine since that offset is about the same difference from a factory GT3RS setup, but the rear might be pretty aggressive. I'm not sure how tucked the rear wheels are on your car, so you would have to make that call.