2021 718 Spyder
For Sale2021 Porsche 718 Spyder
-
Price
$150,000
- Location Palm Coast, FL, 32137, USA
- Condition Used
- VIN WP0CC2A84MS240814
- Mileage 4,950
- Engine 6 cyl
- Drive Type 2WD
- Transmission Manual
- Vehicle Type Convertible
- Exterior Color Yellow
Description:
Reduced: As new, in perfect condition, and lots of extras. 1 of 23 in Racing Yellow with a 6-speed manual. The car has never hit redline or been tracked (my avatar is from a parade lap - look close and you will see my wife with me!), hit redline, and was broken in as per the manual. The first service was recently completed at Porsche of Jacksonville. It was ordered/purchased new from Porsche of Orlando in July 2021. I have the manual, window sticker, both keys, etc. Below is a list of what I have done (mechanical mods done at Mack Motorwerks), and the Build Sheet is attached as a .pdf file. I live in Florida so the car has only seen straight roads and has basically been an out-to-dinner car on non-rainy days, and garage kept and covered when not used (cleaned after each drive). If one wants a picture of something specific don't hesitate to ask. I saved most of the original parts such as the exhaust and those will be included along with a custom fit car cover.
Soul Street Headers with 200 cell high flow cats
Soul Resonated Race Exhaust
Soul double-wall Slash cut Satin Black exhaust tips with Black hardware
Softronic performance tune
DSC Suspension Module
BMC air filters
GT4 side scoops with RGS mesh inserts
GT4RS rear diffuser fins
AWE wind diffusers
Frunk lid liner
5mm wheel spacers (front only)
Custom Porsche-branded Lloyds floor mats
Custom color-matched painted Porsche crests (frunk hood, steering wheel, trunk lid, and wheel center caps)
Satin Black painted steering wheel airbag trim ring, air vent surrounds, and levers, & radio button trims
Burmester tweeters (2)
Racing Yellow-painted Spyder top emblems
Racing Yellow-painted rear PORSCHE letter overlays
Rear Spyder emblem (from the 981 model)
Custom 3D-printed SC bezel with hood
Sound Symposer Plugged (in firewall from interior)
Suntek PPF (hood, front fenders, mirrors, side sills, and behind rear wheels
Opti-Coat Pro ceramic coat (entire car including wheels)
Softtop, leather, and glass sealants applied
Clear side markers with Lamin-x tint
Rear reflectors and 3rd brake light tinted with Lamin-x tint
Black Interior door latch surrounds
Custom Spyder front spoiler lip and interior side sill decals
Custom Spyder & Porsche dash emblems
4.0 emblems on both doors & console compartment
Painted Porche crest on center console and 718 at shifter base
Leather sun visors with Yellow deviated stitching
Leather door pulls with Yellow deviated stitching
2022 GT3 shift **** with Yellow numbers/letter
Ultimate cup holders (pair)
Driver's side knee rest pad
Custom 3D-printed top hole plugs
3M tinted side windows (20%)
Removable glass wind deflector with 3M tint (20%)
![Default](images/icons/icon1.gif)
Do you have pics of the "top hole plugs"?
![Default](images/icons/icon1.gif)
Personally, I did not notice any real difference but it only involved putting a piece of foam with tape over it, which is behind the carper behind the passenger's side seat.
And pics of the top hole plugs are posted above, in the pics of the Yellow-painted "Spyder" emblems. They are 3D-printed discs that are the same size of the openings where the top snaps in with velcro on the back. I am pretty **** about little things so I had them made to cover the holes when the top is down.
![Default](images/icons/icon1.gif)
And the price is now shown as "OBO" albeit offers at or below MSRP will not be considered due to modifications and custom touches, not to mention the car's perfect condition and treatment from new.
![Default](images/icons/icon1.gif)
![Default](images/icons/icon1.gif)
![Default](images/icons/icon1.gif)
Trending Topics
![Default](images/icons/icon1.gif)
![Default](images/icons/icon1.gif)
If you end up reverting parts to stock for sale, I'd be interested in the gear shifter.
Thanks, best of luck selling this beauty and getting your long-hunted Speedster!
![Default](images/icons/icon1.gif)
If you end up reverting parts to stock for sale, I'd be interested in the gear shifter.
Thanks, best of luck selling this beauty and getting your long-hunted Speedster!
The front and rear markers have Charcoal Lamin-x tint, the darkest shade they make - if you visit their website they might state the % but if not email them and ask.
And the shifter is from the new GT3,, which can be bought from any Porsche place, but sorry, I am not parting out anything from the car since I am sure whoever buys it will want it exactly the way it is now!
![Default](images/icons/icon1.gif)
![Default](images/icons/icon1.gif)
![Default](images/icons/icon1.gif)
![Default](images/icons/icon1.gif)