Description:

I have a set of 19" Forgeline GW3R CL staggered offset wheels finished in satin black, these can be fitted to a 997.2 GT3 RS/RS4.0 or a wide body 997 with a center lock modification and wider front fender extension (997.1 or 997.2 Turbo/GT3 RS/RS4.0 body). These are 3 piece wheels removed from my 997.2 GT3 RS. As you can see the offset is maximized without going past the fender when equipped with Sport Cup 2s.

The two front wheels ideally need to be refinished/powdercoated as WD40 was used to remove the front center locks and left to dry which caused the sheen to change. This is shown in the first picture which I took at an angle that maximizes the contrast. Otherwise it is difficult to see any change in sheen standing 10 feet away.

One of the rear wheels has a very slight bend to the inner wheel lip which was like that since my purchase in 2014 from luv2race on this forum. It can be seen while balancing the wheel however it is too slight to cause any concern or issues. There are no problems balancing the wheel and three are no vibrations at any speed . At the time, the wheels had 400 miles on them according to luv2race, and I put an additional 7000 miles on them. The total mileage on these wheels is about 7400 miles. 

Total cost of the buyer is $2700 shipped USD.

Thanks for looking!


Below is an excerpt from the website:After over 20 years of involvement with teams of virtually every sports car racing organization in the world, we have learned what it takes to produce a racing wheel that can withstand the fierce conditions of the sport. This knowledge has been applied to our latest competition wheel – the GW3R.

The Forgeline GW3R is an attractive contemporary premium 3-piece performance racing wheel featuring our “I-Beamed” spoke technology to reduce weight while adding strength and rigidity. It uses hidden ARP stainless steel assembly hardware for a smooth clean appearance and faster/easier wheel cleaning. Plus the design of the center allows plenty of room for caliper clearance and extreme brake fitment. Visible through-bolts are an option on this wheel, for those who prefer the look of the assembly hardware.

The GW3R is designed for racing. It is engineered with a 1700 lb. street-tire load rating to ensure strength and integrity, even when subjected to the massive loads encountered when used with the stickiest race tires.

The GW3R is produced using our traditional forging method utilizing 6061-T6 aluminum with heat-treated rim shells. And just like any Forgeline wheel, the GW3R offers fully-customizable fitment and finish, including center-lock applications.

•  
  • 3-Piece Performance Wheel
  • Stepped-Lip Design
  • I-Beamed Spoke Technology
  • Hidden ARP Fasteners
  • Generous Brake Clearance
  • Forged 6061-T6 Aluminum
  • Heat-Treated Rim Shells
  • 1700 lb. Street-Tire Load Rating
  • Customizable Fitment and Finish Options
  • Legendary Forgeline Quality and Customer Service
  • Look for it at a race track near you!
  •