FS: 2004 BMW E46 M3 Dinan S2 Street/Track San Jose CA
For Sale2004 BMW M3
-
Price
$20,999• OBO
- Location San Jose, CA, 95128, USA
- Condition Used
- VIN WBSBL93424JR24693
- Mileage 145,000
- Engine 6 cyl
- Drive Type 2WD
- Transmission Manual
- Vehicle Type Coupe
- Exterior Color Gray
Description:
Hello All,
I'm listing up for sale my E46 M3 that I've owned for about 4 years and the last 16K miles. I've done much of the mods listed below to make it a street/track car. For the first 2 years I would do ~8 track days a year on it, I've done 0 since then. Car is an original Dinan S2 and was owned by someone that worked at Dinan in Morgan Hill, CA. Car is high mileage but it has been very well maintained and has all the modifications that make it a good street track car. I've listed the mods committed to memory below - I have a google sheet that lists all the regular maintenance and items replaced as well. Reason for sale is a space issue. This car is to be replaced by a 993/911 and I don't have the space for both - would keep otherwise in case the track itch comes back.
Location: San Jose, CA
Title: Clean in my Name - Reg through 11/2020
Smog: Has been completed on 2/3/2020 ready for transfer
Miles: 145xxx
Transmission: SMG converted to 6 Speed a few thousand miles ago.
Asking Price: $20,999 Received Deposit - so Sale Pending
Contact: PM then we can text/email as needed
Modifications: Everything below besides DINAN parts were done in my ownership
Mason X-Brace
Moton Single Adjustable Shocks
Hyperco Springs
996 Porsche Brembo Brake Calipers with Polar Mounts
ECS 2 Piece CSL Sized Front Rotors 2-Piece (Lots of life still)
Stoptech Slotted Rear Brake Rotors
Hawk Street Pads (Street) + Hawk HP Plus Pads (Track)
Dinan Front Strut Bar
Dinan Monoball Rear RCAB
Ground Control Front FCAB
Adjustable Sway Bar End Links (Front)
Vorshlag Front Camber Plates
Dinan Front Strut Bar
TC-Design Installed Rear Subframe Reinforcement and Diff/Subframe bushings replaced
Dinan Throttle Bodies
Dinan Muffler (Section 3)
APEX-bullet-nose wheel studs
APEX ARC8 18x10 ET25 wheels powder coated technoviolet
Hankook RS4 Tires 275 series
Carbon Sunroof Plug (have stock sunroof cassette)
WPC Rod Bearings Done
Besien Vanos Rebuild - Turbo-Toy Exhaust Hub, new cam bolts - did valve job and chain tensions etc while there
Evolve Carbon Airbox and Tune (Alpha-N)
Clutchmasters Stage 3+ FX350 Clutch Kit and Aluminum Flywheel
CAE Shifter with new bushings Black/Red Combo
Hard Motorsports Front Door Cards + RS Pull Straps
Dinan Rear 3.91 Differential
AEM Fuel Pump
LAWrence Hood Vents in Hood
Electric Fan 16" with Lawrence Mount
New Bosch Battery 2/20
Maintenance Stuff:
Many things have been replaced including Motor Mounts, Transmission Mounts, Subframe and Diff Bushings. Spark Plugs and Coils and Fuel Pump replaced in last <3K miles. Valve Adjustment done about 10K miles ago when vanos was updated. Water Pump replaced. Coolant was just flushed from radiator and block <100 miles ago. Oil change also recent and I've always used liquimoly 10w60. Transmission Gear oil replaced with Redline mixture to help with the chatter of the flywheel (it still chatters), New Bosch battery 2/2020.
Interior:
Hard Motorsports Door Panels with one speaker put back in has RS door pulls
Momo Steering Wheel and Hub
Cobra Bucket seat on lowest possible setting (Seats not included in Price, but can include the brackets)
Removed Passenger seat.
All above can be moved back to stock
Smog Stuff:
Car originally had SGT headers and a catted section 1 but was removed for smog. Car also had/comes with stock intake manifold and airbox for smog. Carbon Airbox is currently on car, but I had to use the stock intake manifold/intake to pass emissions recently.
Other parts:
I have an extra set of TCKline single adjustable shocks, OEM Seats, doorcards, steering wheel, intake manifold, carbon trunk (works but not the most pretty) and other lil parts.
google photos link: https://photos.app.goo.gl/YUTrsYKZVF2DAyKj8