Forgeline GS1R on my GT4 !!
#32
I appreciate the picture, but unfortunately it's hard to tell the caliper clearance from the face-on angle. It looks like they could be touching.
Towards the center bolt face side of the spokes, how much clearance does it look like there is from the back of the spoke to the face of the caliper? (10 mm?) Thanks.
Towards the center bolt face side of the spokes, how much clearance does it look like there is from the back of the spoke to the face of the caliper? (10 mm?) Thanks.
#40
Both the front and rear are a tad wider than OEM. It is not very much. This gives the car more of a clubsport look and a slightly wider track for the circuit. It looks amazing in person. I'll try and take more pics next weekend when I put the Forgelines back on.
#42
I'm just gonna piggyback on this thread instead of creating my own. Big thanks to Brian at Competition Motorsport.
Quick pics of GS1R with RE71R tires.
There's about 1/2" (closest to the hub)- 3/4" (farthest away from the hub) clearance between the caliper face and back of the spokes. A lot more clearance than OE wheels.
Quick pics of GS1R with RE71R tires.
There's about 1/2" (closest to the hub)- 3/4" (farthest away from the hub) clearance between the caliper face and back of the spokes. A lot more clearance than OE wheels.
#44
Looks awesome Edwin! Thank you for the business!
#45
The wheels look great! Is this for the front wheel or the rear wheel? This clearance means Forgeline left some concavity on the table, perhaps to share exact wheel face CAD between many offsets...