Any vendors selling an add on gurney lip for our GT4 wing yet?
#46
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
18 Matte Gurneys and 6 sets Matte Dive Planes inbound
Hi all,
I'll put up a post, but most are watching this one.
We have 18 Matte Gurneys and 6 pairs of Matte Dive Planes inbound to arrive on Friday.
Gloss Gurney's will be a bit longer, happy to substitute Matte for Gloss...
I'll put up a post, but most are watching this one.
We have 18 Matte Gurneys and 6 pairs of Matte Dive Planes inbound to arrive on Friday.
Gloss Gurney's will be a bit longer, happy to substitute Matte for Gloss...
__________________
Dundon Motorsports
Gig Harbor, WA
253-200-4454
jamie@dundonmotorsports.com
www.dundonmotorsports.com
Facebook.com/dundonmotorsports
Instagram @dundon_motorsports
Dundon Motorsports
Gig Harbor, WA
253-200-4454
jamie@dundonmotorsports.com
www.dundonmotorsports.com
Facebook.com/dundonmotorsports
Instagram @dundon_motorsports
#47
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
pic ^
#49
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
The dive planes are on the car solid, my partner told me the wrong item had an issue, it was one of the carbon wing ends...
Last edited by Jamie@dundonmotorsports; 09-29-2016 at 06:07 PM.
#50
Three Wheelin'
#51
Three Wheelin'
how much additional down force do they dive planes and corresponding gurney provide?
I am wondering that the installation method of tape suggest it cant be much....
I am wondering that the installation method of tape suggest it cant be much....
#53
#57
Installed mine just now, it fits perfectly - and it's a complex shape. Well done guys!
Some tricks after having done this a few times (and having messed up a couple times)
1) (mentioned here already) Clean the edge with isopropyl, and then dry well.
2) Test fit it to make you can see how it's supposed to fit.
3) Start pulling off the 3M cover, maybe 6-8" of it and do your best job to fit it exactly, and pushed up against one end plate of the wing.
4) As you position it down the length of the wing, pull 3-4" of tape cover off at a time as you work your way down. Do not pull all the tape off at once!!
Some tricks after having done this a few times (and having messed up a couple times)
1) (mentioned here already) Clean the edge with isopropyl, and then dry well.
2) Test fit it to make you can see how it's supposed to fit.
3) Start pulling off the 3M cover, maybe 6-8" of it and do your best job to fit it exactly, and pushed up against one end plate of the wing.
4) As you position it down the length of the wing, pull 3-4" of tape cover off at a time as you work your way down. Do not pull all the tape off at once!!
#58
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Installed mine just now, it fits perfectly - and it's a complex shape. Well done guys!
Some tricks after having done this a few times (and having messed up a couple times)
1) (mentioned here already) Clean the edge with isopropyl, and then dry well.
2) Test fit it to make you can see how it's supposed to fit.
3) Start pulling off the 3M cover, maybe 6-8" of it and do your best job to fit it exactly, and pushed up against one end plate of the wing.
4) As you position it down the length of the wing, pull 3-4" of tape cover off at a time as you work your way down. Do not pull all the tape off at once!!
Some tricks after having done this a few times (and having messed up a couple times)
1) (mentioned here already) Clean the edge with isopropyl, and then dry well.
2) Test fit it to make you can see how it's supposed to fit.
3) Start pulling off the 3M cover, maybe 6-8" of it and do your best job to fit it exactly, and pushed up against one end plate of the wing.
4) As you position it down the length of the wing, pull 3-4" of tape cover off at a time as you work your way down. Do not pull all the tape off at once!!
For everyone else we have 13 Matte Clear Gurney's in stock!
Jamie